Wednesday, December 21, 2011

Christmas clocks

It's beginning to look a lot like Christmas...... everywhere you go. Ok, it's not. I don't know what it is this year - the doom and gloom peddled on all the news channels, the recession, austerity measures or what - but it just doesn't feel Christmassy.

Maybe it's just because the weather is still quite mild and all the spring bulbs are popping up.
But there's something particularly un-Christmassy this year. There are a few lights about and a few shops have made a half-hearted nod towards Xmas, but in the main - and talking to other people, I'm not the only one - we're still waiting to be hit full in the face with Christmas Cheer.

Which is probably why I've left it so late to get making Xmas gifts this year. Normally, come December 1st, the first little door on the advent calendar gets opened and it's straight into maker-mode, planning and making for everyone. But for some reason, this year things have been left a little late.

Back in November, I was helping Jason with his toy cars and lights controller. But since then, not much on the Xmas front. So last night I fired up the laser cutter and got designing some novelty clocks.
Most of the time was spent on the designing and drawing rather than the actual manufacture (which meant sending to the cutter, waiting a while, then some basic assembly afterwards) but the end results are quite pleasing:

[photo here]

Here are the design files should anyone fancy having a go -
Send the dxf to your laser cutter and carve out from your favourite coloured sheet of A4 acrylic (loaded in landscape).


Links to files:



To finish the clock off (and mostly, to hide the clock movement from behind) I cut out some shapes from a second colour and fitted them inside some of the cut-outs from the main clock face. By turning the clock over they could simply be held in place with some tape. I used double-sided tape, then stuck a piece of card over the whole arrangement, to keep the shapes from falling out once the clock was on the wall.

[photo of reverse]


Here's a slightly different clock, requiring a little more assembly.
At first I wasn't too sure about the design but the more I look at it, the more it grows on me. At first I thought about making the smaller coloured numbers as inserts (so they mounted flush with the surrounding shapes) but now I think I prefer them as relief shapes, sitting on top of the basic number shape.

[photo of second clock]

I think it's the clear acrylic ring that makes this clock work so well. It means positioning the numbers is relatively easy (it would have been a nightmare trying to stick just the very edges of a few numbers to the centre disc to hold it all together) but when the clock is on the wall, the final effect is quite striking!

Here are the design files if you fancy making one of these yourself:

this is the clear acrylic ring that some of the numbers mount onto

with some clever layout, you can get all the numbers onto a single A4 sheet

optional extra - inset characters for the numbers 2,4, 6, 8, 10 and 12

Links to files:


Lastly, here's a simpler version of the second clock that requires much less assembly, designed smaller to fit on a single A4 sheet of acrylic (or wood or whatever you're making your clocks out of!)

this clock has all the numbers connected to make a single solid piece

using the previous clock as a base, this clock can also have raised numbers placed on top of the base design, or you can cut the inset figures out and use different coloured acrylic (wood, whatever) to fill the gaps

Links to files:
http://www.nerdclub.co.uk/files/clock1_single_piece.dxf
http://www.nerdclub.co.uk/files/clock1_with_insets.dxf
http://www.nerdclub.co.uk/files/clock1_inset_numbers.dxf


Posted by at
Labels: , ,

1 comment:

Subscribe to: Post Comments (Atom)