CNC Mold Machining for magnetic plates Resin Casting

Today i CNC machined the molds out of 12mm thick MDF for resin casting of magnetic plates.The tool used was 8mm end mill at 70inch/minute using 3mm per pass depth of cut. The mold machining took 35minutes on the CNC router. The cast resin will help bounding the magnet with the CS plates so that the magnets stay at high RPM.

 Hole drilling started on my home made CNC machine.

 and the rest of the pictures are below.

and the magnetic plate fitted exactly in the MDF mold as desired.