Surtech's Model LS 90 Slag Grinder offers an outstanding price versus performance ratio. One person using the LS90 can deslag as many flame cut blanks as up to six persons with angle grinders. This is possible because of the superior grinding ability of Model LS 90 and the considerably reduced handling.
Model LS90 consists of a table approx.
2000mm long and 800mm wide, an overhead abrasive belt head with a contact wheel carriage and electrical controls for motorised vertical table travel and for a two speed or reversible abrasive belt drive.
Flame cut blanks are laid out on the table.
By moving the contact wheel carriage left to right and right to left and the table back or forth all blanks can be ground in one operation.
The 6HP belt drive motor has ample power for even the toughest burr and the 6000mm long belt guarantees long life and little down time due to belt changes.
The Slag Grinder can be viewed and tested at Surtech's Abrasive Test Centre in Birmingham.
No comments:
Post a Comment