The Jones and Shipman 524 Easy surface and profile grinder meets the requirements of the production environment as well as the accuracy, quick set up and change over demands of the toolroom. It also fulfils the criteria of both CNC and manual operation thanks to a GE-Fanuc control system and Jones Shipman 'Easy' software. Complex shapes, angles, radii and ultra flat surfaces can be precision ground quickly and easily.
Even inexperienced operators can obtain immediate improvements in set up and changeover times and in overall productivity for more complex work.
This is due to the combination of GE-Fanuc Touchscreen technology with Jones and Shipman's proprietary 'Easy' icon based software, which offers numerical control without the inherent complexity or cost penalties of traditional CNC systems.
In fact the 524 Easy can function as either a simple hand/hydraulic controlled machine with manual dressing and no set-up procedures or, once set using the easy-to-use 'self teach' software, can perform fully automatic dressing and grinding cycles.
With levels of functionality comparable to CNC but at lower cost all 'Easy' models are fast and simple to set-up via the touchscreen and easy-to-use Jones and Shipman icon-based software.
The control possesses the capabilities to interpolate two axes simultaneously to provide the creation of complex shapes, angles, radii and surfaces, with quick and easy set-up.
Y and Z axis control is via ballscrews driven from GE-Fanuc AC digital servomotors with 0.000004in (0.01 micron) Heidenhain 'Absolute' linear scale feedback.
On start-up, the 'Easy' control offers the operator three simple options: Manual mode, Dress mode or Grind Cycle mode.
In Manual mode the 'Easy' operates as a simple hand operated machine with hydraulic or manual table movement and handwheels for the crossfeed and downfeed which show position via a scale readout on the screen.
Work speeds and feeds are simply adjustable via the touchscreen should the operator wish to set an area grind or auto downfeed in place of manual movement once he has touched on.
Dress mode offers five standard wheel shape options flat, slot, facing, Vee form and full ISO with one or two diamonds as needed.
Dressing increments, speeds and frequency allow for roughing and finishing to optimise wheel performance.
A great feature when the full software package is incorporated is 'intelligent roughing out' of the wheel, - the system will automatically 'chop out' a basic form and then finish dress using the exact profile.
Wheel dressing can be initiated in or out of cycle and dress-on-demand for plain or complex wheel forms is provided as standard.
Dress-On-Demand allows the operator to press the Dress button at any time and the machine will stop wherever it is, dress the wheel with full compensation and return to continue from where it left off.
Grind mode allows from one to 20 grind cycles to be linked as the complexity of the component dictates including plunge, multi plunge, area (intermittent or continuous), face grind, plunge and face and multi plunge and face.
The 524 Easy has been designed from scratch to give improved productivity.
With a new bed, saddle, table, column etc, it offers increased precision, geometry and rigidity and continues a long-established tradition of excellence in manufacture.
Generously proportioned high-grade cast iron major units all combine to create greater rigidity for optimum performance in terms of grinding accuracy and repeatability.
The wheelhead slide moves vertically on low friction, preloaded ball and roller bearings, thereby ensuring extreme sensitivity, while the hand scraped table and saddle slideways are Turcite coated and lubricated automatically to reduce friction to the minimum possible.
'Sliding dogs', which are simply moved by hand without the need for tools, set the table reversal length, their positions being detected by proximity switches sited in the saddle.
Innovative design, high build quality and a rigid and stable machine structure combine to ensure accuracy and productivity and makes this the product of choice for both old and new to the art of precision surface grinding.
The 524 Easy forms the cornerstone of Jones and Shipman's all new range of Surface Grinders.
Sunday, December 31, 2006
Saturday, December 30, 2006
CNC cylindrical grinder improves product roundness
Accura Technics announces advancements in precision grinding applicable to aerospace, automotive, bearing and optics manufacturing. In capability tests, Accura's Model 1210G CNC grinder produced 0.000010in (0.25 micron) roundness in ball bearing outer races and 0.000006in (0.15 micron) roundness in inner races. This multi-surface grinder was delivered to the USA's Adcole Corporation (Marlborough, Massachusetts; Pompano Beach, Florida) for grinding spindle components for camshaft and crankshaft measuring machines.
Roundness of these components directly impacts axial and radial run-out of the assembled spindle.
Excellent run-out is crucial to the measuring machines' performance.
Upon inspection of the first spindle processed on the 1210G, Adcole's general manager, Patrick Cole, said, 'Needless to say, we are impressed.
And it will only get better from here.' The 1210G is equipped with a hydrostatic bearing workhead, and two wheelheads: an air bearing ID/OD spindle, and a ball bearing rotary surface spindle.
The two wheelheads are mounted on independent CNC axes.
These axes are driven by ball screws and servomotors while the X-axis is driven by a linear motor.
The three slides are mounted on a thermally stable, natural granite base.
'Customers turn to us for creative solutions to their precision grinding needs,' said Patrick Hurst, president of Accura Technics.
'We work with our customers to develop robust processes that deliver higher precision at a competitive cost which saves them time and money.' The 1210G has a 12in (300mm) swing and 10in (250mm) workpiece height capacity.
Standard X-axis travel is 14in (350mm).
Standard Z-axis travel is 12in (300mm).
The machine can be fully automated with robot loader, conveyors and gauging.
Optional features include C-axis for non-round grinding and acoustic emission monitoring system.
Accura Technics other products include the MicroTol - a machine tool platform suitable for optics machining, hard turning, shoe centerless ID grinding, and miniature bore grinding.
Roundness of these components directly impacts axial and radial run-out of the assembled spindle.
Excellent run-out is crucial to the measuring machines' performance.
Upon inspection of the first spindle processed on the 1210G, Adcole's general manager, Patrick Cole, said, 'Needless to say, we are impressed.
And it will only get better from here.' The 1210G is equipped with a hydrostatic bearing workhead, and two wheelheads: an air bearing ID/OD spindle, and a ball bearing rotary surface spindle.
The two wheelheads are mounted on independent CNC axes.
These axes are driven by ball screws and servomotors while the X-axis is driven by a linear motor.
The three slides are mounted on a thermally stable, natural granite base.
'Customers turn to us for creative solutions to their precision grinding needs,' said Patrick Hurst, president of Accura Technics.
'We work with our customers to develop robust processes that deliver higher precision at a competitive cost which saves them time and money.' The 1210G has a 12in (300mm) swing and 10in (250mm) workpiece height capacity.
Standard X-axis travel is 14in (350mm).
Standard Z-axis travel is 12in (300mm).
The machine can be fully automated with robot loader, conveyors and gauging.
Optional features include C-axis for non-round grinding and acoustic emission monitoring system.
Accura Technics other products include the MicroTol - a machine tool platform suitable for optics machining, hard turning, shoe centerless ID grinding, and miniature bore grinding.
Friday, December 29, 2006
Entry-level tool grinding and inspection
The trio of new Walter Helitronic tool grinding and Helicheck tool inspection machines announced by Kandoumlrber Schleifring UK of Honiley near Kenilworth not only reinforces Walter's position as a world leader in the tool grinding and inspection field, but the developments also address user demands both for entry-level tool grinding and inspection equipment plus a machine specifically to grind micro tools. The new machines are: The Helitronic Basic - a budget-priced five-axis tool grinder; The Helitronic Micro - for the consistent production of tools of 0.1 mm to 12.7 mm diameter; and The Helicheck Basic - an entry-level, high-accuracy tool measurement machine. The new machines are based on similar high-quality construction principles to Walter's existing models and, likewise, also incorporate the company's renowned tool grinding software.
But importantly, the new machines feature CNC and drive hardware from Fanuc - 'ultra-reliable and globally standardised technology', says Neil Whittingham, sales director of Kandoumlrber Schleifring UK.
A derivative of the highly successful Helitronic Power, the new Helitronic Basic tool grinder offers an unrivalled route for cost-effective tool regrinding.
With Fanuc 310i CNC and 15 inch touch screen monitor, the machine features a 70 mm grinding spindle powered by 7 kW drive plus worm gear drive in the A axis.
As standard it is supplied with Walter Window Mode P1 and P3 grinding programs (end mills and drills), and options include coolant tank, Eco tool loading system, automatic clamping and worktable.
The new six-axis Helitronic Micro, on the other hand, has been developed from a clean sheet and is designed to meet the increasing production demands by, for example, the medical and electronics sectors of micro tools of 0.1 mm to 12.7 mm diameter.
Tools from 2 mm to 12.7 mm diameter can be reground.
Featuring an HSK 40, 5 kW spindle and utilising Fanuc 310i CNC that incorporates Walter's 'what you see is what you grind' Helitronic Tool Studio software, the machine's double-ended grinding head (optionally three-spindle, with one 5 kW and two 1.5 kW drives) has integrated cooling that combines with linear drives and torque motor (with integral cooling) and the machine's mineral cast base to help generate high precision, excellent surface finishes and longer wheel life.
An integrated Fanuc robot (double gripper) loading system also features, for fast - less than 10 secs - tool change, in conjunction with the four-pallet Pallet load system.
This provides unmanned working of up to 300 tools per pallet - three pallets for unground tools; one pallet 'empty' for ground tools - of tools from 1 mm to 6.9 mm shank diameter and 120 mm long.
Larger tools of 7 mm to 12.7 mm shank diameter and 120 mm long can be handled at 108 tools per pallet.
An optional, additional manual X axis is available to reduce grinding traverses, where appropriate.
The new Helicheck Basic tool inspection machine occupies 30 per cent less floorspace than the Toolcheck it replaces (by adopting vertical design principles rather than horizontal) and, like its stablemates the Helicheck and Helicheck Pro, it offers 3C Direct View camera technology with cameras for back, front and top light illumination.
The back light provides magnification of 50x, front and top of 100x; and combined with the solid granite base plate for temperature resistance and high stability, the result is a repeatability of 1.5 micron and an absolute accuracy of +/- 2.2 microns at a measuring length of 10 mm (VDI/VDE 2617: E1 = 2.2 microns + L/300).
These new machines are complemented by a new grinding wheel/electrode wheel changer for the Helitronic Power Diamond two-in-one machine for grinding/eroding PCD tools - where up to eight electrodes/wheel sets, with coolant distributor, can be changed in 10 secs - and follow hard on the heels of recently-announced the Helicheck Plus tool inspection machine for measuring standard and micro tools down to 0.1 mm diameter.
But importantly, the new machines feature CNC and drive hardware from Fanuc - 'ultra-reliable and globally standardised technology', says Neil Whittingham, sales director of Kandoumlrber Schleifring UK.
A derivative of the highly successful Helitronic Power, the new Helitronic Basic tool grinder offers an unrivalled route for cost-effective tool regrinding.
With Fanuc 310i CNC and 15 inch touch screen monitor, the machine features a 70 mm grinding spindle powered by 7 kW drive plus worm gear drive in the A axis.
As standard it is supplied with Walter Window Mode P1 and P3 grinding programs (end mills and drills), and options include coolant tank, Eco tool loading system, automatic clamping and worktable.
The new six-axis Helitronic Micro, on the other hand, has been developed from a clean sheet and is designed to meet the increasing production demands by, for example, the medical and electronics sectors of micro tools of 0.1 mm to 12.7 mm diameter.
Tools from 2 mm to 12.7 mm diameter can be reground.
Featuring an HSK 40, 5 kW spindle and utilising Fanuc 310i CNC that incorporates Walter's 'what you see is what you grind' Helitronic Tool Studio software, the machine's double-ended grinding head (optionally three-spindle, with one 5 kW and two 1.5 kW drives) has integrated cooling that combines with linear drives and torque motor (with integral cooling) and the machine's mineral cast base to help generate high precision, excellent surface finishes and longer wheel life.
An integrated Fanuc robot (double gripper) loading system also features, for fast - less than 10 secs - tool change, in conjunction with the four-pallet Pallet load system.
This provides unmanned working of up to 300 tools per pallet - three pallets for unground tools; one pallet 'empty' for ground tools - of tools from 1 mm to 6.9 mm shank diameter and 120 mm long.
Larger tools of 7 mm to 12.7 mm shank diameter and 120 mm long can be handled at 108 tools per pallet.
An optional, additional manual X axis is available to reduce grinding traverses, where appropriate.
The new Helicheck Basic tool inspection machine occupies 30 per cent less floorspace than the Toolcheck it replaces (by adopting vertical design principles rather than horizontal) and, like its stablemates the Helicheck and Helicheck Pro, it offers 3C Direct View camera technology with cameras for back, front and top light illumination.
The back light provides magnification of 50x, front and top of 100x; and combined with the solid granite base plate for temperature resistance and high stability, the result is a repeatability of 1.5 micron and an absolute accuracy of +/- 2.2 microns at a measuring length of 10 mm (VDI/VDE 2617: E1 = 2.2 microns + L/300).
These new machines are complemented by a new grinding wheel/electrode wheel changer for the Helitronic Power Diamond two-in-one machine for grinding/eroding PCD tools - where up to eight electrodes/wheel sets, with coolant distributor, can be changed in 10 secs - and follow hard on the heels of recently-announced the Helicheck Plus tool inspection machine for measuring standard and micro tools down to 0.1 mm diameter.
Thursday, December 28, 2006
Cylindrical grinding machine finishes in one pass
The New ShapeSmart NP4 by Rollomatic is a reinforced version of the existing CNC148P4 cylindrical grinding machine with a patented method of rough and finish grinding in one pass. This machine is ideal for cutting tool blank preparation and grinding precision punches and molding components. The grinding size range is from 16.0 mm (5/8') down to micro scale, with blank length capacity up to 300 mm (12') for automatic loading and 350mm (13.8') for manual loading.
The two grinding slides have been designed with a New technology known as the BoxSlide system, which enhances stability.
To eliminate any run-out on the grinding wheels, the ShapeSmart NP4 features a New arbor system called Perfect Arbor, which uses material compression as a means of centreing the arbor into the spindles.
The NP4 also features the user-friendly tool design software, P4Smart.
With drop-down windows that allow you to edit program text and graphically check the movement of both grinding wheels during machining, it's easier than ever to grind precision blanks, punches and pins.
The two grinding slides have been designed with a New technology known as the BoxSlide system, which enhances stability.
To eliminate any run-out on the grinding wheels, the ShapeSmart NP4 features a New arbor system called Perfect Arbor, which uses material compression as a means of centreing the arbor into the spindles.
The NP4 also features the user-friendly tool design software, P4Smart.
With drop-down windows that allow you to edit program text and graphically check the movement of both grinding wheels during machining, it's easier than ever to grind precision blanks, punches and pins.
Wednesday, December 27, 2006
Super abrasive peel grinding slashes cycle times
Holroyd has employed its super abrasive machining technology to reduce the cycle time for producing turbo charger stators from 5.1/2min to just 46s. These improvements have been achieved using Peel Grinding of the stator shaft, removing as much as 5mm a side in a single cut. In addition, the super abrasive wheel used in the Holroyd process lasts up to 200 times longer than tool inserts used with in twin turret turning, providing a life of at least 10,000 parts to minimise tooling and machine set-up costs.
One of the direct results of Holroyd's expertise in helical rotor production is that the company has established itself as one of the leading suppliers to the turbocharger and supercharger industries; both as a manufacturer and supplier of high precision machine tools, and as a sub-contract manufacturer of components using the self-same machines.
Recently, Holroyd was approached by one manufacturer concerning a cycle-time problem with the machining of turbocharger stators.
The stators comprise an Iconel impeller attached to a mild steel shaft.
Previously, the time to machine the shaft, and the faces and OD of each impeller was 5.1/2 min; this being achieved using twin turret lathes.
However, there were a number of problems with this machine set-up.
First, the cycle time was too long to enable the manufacture to achieve his desired component cost.
Second, although a twin turret lathe was used to ensure full depth of cut on the shaft - without bending, this did not account for the resulting upset of the shaft during the deep machining process.
Third, the depth of cut required - 5mm a side - from the twin turret lathe, and the resulting chattering of the tools in operation, meant that the life of tool inserts was extremely poor, with commensurate high costs for replacement.
Holroyd's approach to solving these problems centred on its super abrasive machining capability: in particular the use of an Edgetek Super Abrasive Turning (SAT) Centre.
The Edgetek SAT employs CBN wheels to achieve productivity rates far in advance of those obtained with hard turning.
It is designed to remove stock from the OD of cylindrical parts (slot, groove, and forms) in all types of materials (from soft to hard) at rates 40% faster than a conventional lathe.
Because productivity with the SAT system goes far beyond that typically obtained with hard turning, the machines are ideal for machining inconel and heat treated powder metal workpieces with interrupted cuts.
They can be used for such typical turning applications as machining slots, interrupted cuts on impellers, gears, splines and facing cylindrical parts.
The use of thin CBN wheels means that the SAT machines are especially well suited to Peel grinding, where high wheel speeds and high workpiece speeds result in very high stock removal rates with low grinding forces.
Thin CBN wheels used in this way have cutting edges similar to turning tools, thereby reducing the cutting forces required between the wheel and the work piece.
Compared to conventional grinding processes, Peel grinding typically removes three times the stock with half the force within the same time frame, and allows contour-grinding of a part in the same way that conventional machining does.
Holroyd applied its SAT Peel grinding technology to the tubocharger rotors with impressive results.
The overall cycle time for machining shaft, faces and impeller OD was reduced from 5.1/2 min to just 46s - a reduction of nearly 88%.
In addition, the improved burn threshold qualities of the Edgetek SAT machine result in a lower finished surface temperature of the workpiece, which means no upset and no undesirable friction weld rings generated during the super abrasive turning process.
Finally, toolwear and, consequently, tooling and set-up costs, are much lower using the Edgetek SAT machine: the life of the CBN wheels extending to an average of 10,000 parts before re-tooling and machine set-up is required.
'We are not surprised by these findings,' said Neil English, sales director of Holroyd.
'In every case where we have performed machining trials with our Edgetek machines we have achieved at least a 40 to 50% increase in throughput, and in many cases it is much, much more.' In one recent application in the aerospace industry, an Edgetek super abrasive machine replaced seven conventional milling and grinding machines, and achieved a reduction in the throughput time for machining a highly complex and extremely hard Inconel part from 8 hours, to just 12 minutes.
English said: 'The large depths of cut and accompanying lower temperature work-piece characteristics that can be achieved with our Edgetek machines - even across difficult to work materials, are the key to achieving improved productivity, reduced process times and improved quality in highly competitive global markets.
There is no doubt that Edgetek technology is the future for machining, with the added benefit that it's available now.' Holroyd manufactures the Edgetek machines in all types and configurations to suit specific applications.
One of the direct results of Holroyd's expertise in helical rotor production is that the company has established itself as one of the leading suppliers to the turbocharger and supercharger industries; both as a manufacturer and supplier of high precision machine tools, and as a sub-contract manufacturer of components using the self-same machines.
Recently, Holroyd was approached by one manufacturer concerning a cycle-time problem with the machining of turbocharger stators.
The stators comprise an Iconel impeller attached to a mild steel shaft.
Previously, the time to machine the shaft, and the faces and OD of each impeller was 5.1/2 min; this being achieved using twin turret lathes.
However, there were a number of problems with this machine set-up.
First, the cycle time was too long to enable the manufacture to achieve his desired component cost.
Second, although a twin turret lathe was used to ensure full depth of cut on the shaft - without bending, this did not account for the resulting upset of the shaft during the deep machining process.
Third, the depth of cut required - 5mm a side - from the twin turret lathe, and the resulting chattering of the tools in operation, meant that the life of tool inserts was extremely poor, with commensurate high costs for replacement.
Holroyd's approach to solving these problems centred on its super abrasive machining capability: in particular the use of an Edgetek Super Abrasive Turning (SAT) Centre.
The Edgetek SAT employs CBN wheels to achieve productivity rates far in advance of those obtained with hard turning.
It is designed to remove stock from the OD of cylindrical parts (slot, groove, and forms) in all types of materials (from soft to hard) at rates 40% faster than a conventional lathe.
Because productivity with the SAT system goes far beyond that typically obtained with hard turning, the machines are ideal for machining inconel and heat treated powder metal workpieces with interrupted cuts.
They can be used for such typical turning applications as machining slots, interrupted cuts on impellers, gears, splines and facing cylindrical parts.
The use of thin CBN wheels means that the SAT machines are especially well suited to Peel grinding, where high wheel speeds and high workpiece speeds result in very high stock removal rates with low grinding forces.
Thin CBN wheels used in this way have cutting edges similar to turning tools, thereby reducing the cutting forces required between the wheel and the work piece.
Compared to conventional grinding processes, Peel grinding typically removes three times the stock with half the force within the same time frame, and allows contour-grinding of a part in the same way that conventional machining does.
Holroyd applied its SAT Peel grinding technology to the tubocharger rotors with impressive results.
The overall cycle time for machining shaft, faces and impeller OD was reduced from 5.1/2 min to just 46s - a reduction of nearly 88%.
In addition, the improved burn threshold qualities of the Edgetek SAT machine result in a lower finished surface temperature of the workpiece, which means no upset and no undesirable friction weld rings generated during the super abrasive turning process.
Finally, toolwear and, consequently, tooling and set-up costs, are much lower using the Edgetek SAT machine: the life of the CBN wheels extending to an average of 10,000 parts before re-tooling and machine set-up is required.
'We are not surprised by these findings,' said Neil English, sales director of Holroyd.
'In every case where we have performed machining trials with our Edgetek machines we have achieved at least a 40 to 50% increase in throughput, and in many cases it is much, much more.' In one recent application in the aerospace industry, an Edgetek super abrasive machine replaced seven conventional milling and grinding machines, and achieved a reduction in the throughput time for machining a highly complex and extremely hard Inconel part from 8 hours, to just 12 minutes.
English said: 'The large depths of cut and accompanying lower temperature work-piece characteristics that can be achieved with our Edgetek machines - even across difficult to work materials, are the key to achieving improved productivity, reduced process times and improved quality in highly competitive global markets.
There is no doubt that Edgetek technology is the future for machining, with the added benefit that it's available now.' Holroyd manufactures the Edgetek machines in all types and configurations to suit specific applications.
Tuesday, December 26, 2006
UK pressworker steps in as home supplier
Corus Europressings (Cardiff), Harlow Pressings (Cwmbran) and West Riding Pressings (Brighouse), major manufacturers of pressed metal parts for the home entertainments and white goods industries, have recently closed down, giving Clamason a golden opportunity to step in as the alternative UK supplier who can meet all the necessary quality requirements and standards. On top of that, because Sharp Precision Manufacturing (UK) do not run a press shop any more at Wrexham, Clamason is manufacturing the top and bottom RFI shielding cans for the integrated digital tuner in the latest 42in and 50in plasma TV sets produced by Pioneer GB at Castleford, West Yorkshire, for the UK and Europe. Accordingly business is booming for Clamason Industries to the extent that the company quoted for a record �20m worth of presswork, and enjoyed record sales, in the first quarter of 2006.
As its guiding principle for 60 years, Clamason has always been prepared to refocus and diversify towards new areas of technical innovation and market growth, correspondingly investing in its manufacturing facilities to fulfil those needs.
And so the acquisition of tooling from factory closures has added Thomson Broadcast UK, Panasonic and Pioneer to Clamason's customer portfolio.
Their requirements are very similar in that they all need the painted covers, bases and backplates for home entertainment systems (DVRs, Sky and Freeview boxes).
Thomson and Panasonic no longer assemble these products in South Wales but, such is demand for replacement parts (1000's per week), the contracts will add significantly to Clamason's turnover.
Clamason has been able to intervene and help these household names in part because of its successful track record of having made the original BSkyB decoder box back in the 1990's, for which major project it installed a six-station transfer press line.
Further, with its new plant now open for business at Nitra, Slovakia, Clamason is discussing original equipment manufacture with Panasonic in the adjacent Czech Republic also.
As its guiding principle for 60 years, Clamason has always been prepared to refocus and diversify towards new areas of technical innovation and market growth, correspondingly investing in its manufacturing facilities to fulfil those needs.
And so the acquisition of tooling from factory closures has added Thomson Broadcast UK, Panasonic and Pioneer to Clamason's customer portfolio.
Their requirements are very similar in that they all need the painted covers, bases and backplates for home entertainment systems (DVRs, Sky and Freeview boxes).
Thomson and Panasonic no longer assemble these products in South Wales but, such is demand for replacement parts (1000's per week), the contracts will add significantly to Clamason's turnover.
Clamason has been able to intervene and help these household names in part because of its successful track record of having made the original BSkyB decoder box back in the 1990's, for which major project it installed a six-station transfer press line.
Further, with its new plant now open for business at Nitra, Slovakia, Clamason is discussing original equipment manufacture with Panasonic in the adjacent Czech Republic also.
Monday, December 25, 2006
Precision metal pressings fight back
Clamason's precision metal pressings are now fighting back in all sorts of ways against plastics, providing superior solutions for many so-called 'traditional' plastics applications in the medical device sector. Accordingly, in comparison with metal pressings, plastics may suffer from shrinkage, joint line and RFI / EMI shielding problems, be degraded over time by heat, light and ultraviolet rays and hold lower dimensional tolerances. Then, unlike plastics, Clamason presswork is recyclable in 95% of cases.
The latest examples of how metals are effectively replacing plastics in medical equipment were displayed on Clamason Industries' Stand 711 at Medical Device Technology 2006, NEC, Birmingham, on February 15th - 16th.
Clamason Industries takes great care to safeguard customer confidentiality, so therefore cannot detail the growing number of medical devices incorporating its pressed metal, precision components, which go well beyond the more traditional pressed scalpel blades, pins, rods and implants.
Clamason Industries can, however, quote the capabilities and procedures which the company has in place to ensure that its engineering solutions meet the exacting standards demanded of medical device protocols.
In fact 50% of the cost of a medical component can be its validation cost.
Accordingly, all Clamason medical components are fully process validated using Design, Installation, Operational and Production Qualification protocols (DQ / IQ / OQ / PQ).
In addition, the Clamason team is trained in the use of URS (User Requirement Specifications), CAPA (Corrective and Preventative Actions) and GMP (Good Manufacturing Practice).
The new �40,000 Simac Masic 3D realtime vision system at Clamason measures and monitors in 3D 100% of thin and intricate healthcare components fed from a high-speed press in a continuous strip and requiring measurement of key features to 50-micron tolerances.
The latest examples of how metals are effectively replacing plastics in medical equipment were displayed on Clamason Industries' Stand 711 at Medical Device Technology 2006, NEC, Birmingham, on February 15th - 16th.
Clamason Industries takes great care to safeguard customer confidentiality, so therefore cannot detail the growing number of medical devices incorporating its pressed metal, precision components, which go well beyond the more traditional pressed scalpel blades, pins, rods and implants.
Clamason Industries can, however, quote the capabilities and procedures which the company has in place to ensure that its engineering solutions meet the exacting standards demanded of medical device protocols.
In fact 50% of the cost of a medical component can be its validation cost.
Accordingly, all Clamason medical components are fully process validated using Design, Installation, Operational and Production Qualification protocols (DQ / IQ / OQ / PQ).
In addition, the Clamason team is trained in the use of URS (User Requirement Specifications), CAPA (Corrective and Preventative Actions) and GMP (Good Manufacturing Practice).
The new �40,000 Simac Masic 3D realtime vision system at Clamason measures and monitors in 3D 100% of thin and intricate healthcare components fed from a high-speed press in a continuous strip and requiring measurement of key features to 50-micron tolerances.
Sunday, December 24, 2006
Partnership makes quality medical components
Close co-operation at all stages between three companies Clamason Industries, Bruderer UK and Simac Masic has provided an exemplary engineering solution for a critical small precision component which exceeds the exceptionally stringent quality requirements of an international healthcare OEM. The growing number of medical devices incorporating Clamason's precision pressings go well beyond the more traditional pressed scalpel blades, pins, rods and implants. All Clamason medical components are fully process validated using Design, Installation, Operational and Production Qualification protocols (DQ / IQ / OQ / PQ).
In addition, the Clamason team is trained in the use of URS (User Requirement Specifications), CAPA (Corrective and Preventative Actions) and GMP (Good Manufacturing Practice) - all essential for medical industry approvals.
In this particular application, Clamason's new, state-of-the-art, �200,000 Bruderer press, model BSTA 250-75B, integrated with a decoiler and crop-off station, runs in a dedicated cell at high speeds of up to 800 strokes per minute, producing two parts per stroke.
The 25-tonne, PLC-controlled, Bruderer BSTA Series press has a bed length of 750mm and features quick-change tooling for JIT manufacture.
Plantmaker Bruderer is a world leader in stamping technology and a byword for precision, with a famous 60-year history dating back to its foundation in 1943 at Frasnacht, Switzerland, where Clamason's engineers were trained comprehensively on the new machine.
Most spare parts are held conveniently in stock at the Luton headquarters of Bruderer UK, who offer an impressive door-to-door service within 24 hours.
A �40,000 Simac Masic 'Stampede' 3D realtime vision system ensures zero-defect production of the intricate and highly toleranced healthcare components which are fed from this press in a continuous strip.
A world away from the previous UK-wide system of sample-based inspection, which was based upon periodic checks and charts of trends, the in-line inspection of 100% of the thin metal parts requires the measurement of four key features to a 50-micron tolerance.
For example, to analyse height characteristics, the system measures and monitors each component in 3D from the side.
A standard vision system can only measure in two dimensions but, by developing an innovative arrangement of a second camera, light and product strip, third-dimension features can also be checked with the required accuracy and repeatability.
In other applications for the Bruderer BSTA 250-75B, ten or more components can be stamped out per stroke at over 1000 strokes a minute and, if four or five measurements are required per part, the Simac Masic 'Stampede' inspection system has to perform up to 50,000 measurements per minute ! The company Simac Masic has been working since 1992 as an integrator with PPT Vision of Minneapolis, where their hardware and operating system are produced.
In addition, the Clamason team is trained in the use of URS (User Requirement Specifications), CAPA (Corrective and Preventative Actions) and GMP (Good Manufacturing Practice) - all essential for medical industry approvals.
In this particular application, Clamason's new, state-of-the-art, �200,000 Bruderer press, model BSTA 250-75B, integrated with a decoiler and crop-off station, runs in a dedicated cell at high speeds of up to 800 strokes per minute, producing two parts per stroke.
The 25-tonne, PLC-controlled, Bruderer BSTA Series press has a bed length of 750mm and features quick-change tooling for JIT manufacture.
Plantmaker Bruderer is a world leader in stamping technology and a byword for precision, with a famous 60-year history dating back to its foundation in 1943 at Frasnacht, Switzerland, where Clamason's engineers were trained comprehensively on the new machine.
Most spare parts are held conveniently in stock at the Luton headquarters of Bruderer UK, who offer an impressive door-to-door service within 24 hours.
A �40,000 Simac Masic 'Stampede' 3D realtime vision system ensures zero-defect production of the intricate and highly toleranced healthcare components which are fed from this press in a continuous strip.
A world away from the previous UK-wide system of sample-based inspection, which was based upon periodic checks and charts of trends, the in-line inspection of 100% of the thin metal parts requires the measurement of four key features to a 50-micron tolerance.
For example, to analyse height characteristics, the system measures and monitors each component in 3D from the side.
A standard vision system can only measure in two dimensions but, by developing an innovative arrangement of a second camera, light and product strip, third-dimension features can also be checked with the required accuracy and repeatability.
In other applications for the Bruderer BSTA 250-75B, ten or more components can be stamped out per stroke at over 1000 strokes a minute and, if four or five measurements are required per part, the Simac Masic 'Stampede' inspection system has to perform up to 50,000 measurements per minute ! The company Simac Masic has been working since 1992 as an integrator with PPT Vision of Minneapolis, where their hardware and operating system are produced.
Saturday, December 23, 2006
Precision pressworker competes with Far East
Metalworkers in the cities of the People's Republic of China are thrilled to earn �1000 (15,000 yuan) a year, and 200 million rural workers can't wait to join them. So how can metal manufacturing companies in Britain's Black Country heartland compete with such low labour costs? Clamason Industries is a family owned and managed, precision presswork manufacturer with over 100 employees (75% of whom are in production functions), located on a two-acre site at Kingswinford.
The company currently has annual sales of �7.5 million, which it expects to increase year-on-year.
Clamason is in many ways the modern model for a family company, with business and family in close harmony.
Also, the 'people' side of the business lies at the heart of the management philosophy and underpins the company's commercial success.
As evidence, Clamason is proud to have achieved the Investor-In-People Award and a prestigious National Training Award.
The company currently has annual sales of �7.5 million, which it expects to increase year-on-year.
Clamason is in many ways the modern model for a family company, with business and family in close harmony.
Also, the 'people' side of the business lies at the heart of the management philosophy and underpins the company's commercial success.
As evidence, Clamason is proud to have achieved the Investor-In-People Award and a prestigious National Training Award.
Friday, December 22, 2006
Laser micromachining services boosted
Oxford Lasers is a world leader in the provision of laser micromachining systems and services. Due to rapidly growing sub-contract demand from the electronics, bio-medical, automotive, semiconductor, sensor and other high technology sectors Oxford Lasers has commissioned a new laser micromachining facility for high volume production. At the same time, existing micromachining facilities are being upgraded to give even higher positional accuracy for certain extremely demanding applications.
Sub-contracting customers can take advantage of the latest infrared, visible and UV lasers with multi-axis part manipulation.
Trepanning heads, optical and electron microscopes, vision systems for part location, and CAD/CAM file conversion are all available for: - micro hole drilling: holes down to 1 micron diameter can be drilled in almost any material including stainless steel, hardened steel, refractory materials, ceramics, diamond, polyimide and ABS - micro cutting: cut widths down to 5 microns in almost any material - micro milling: feature sizes down to 5 microns Typical applications include: - production of bio-medical micro parts - drilling holes in chemical sensors - manufacture of fuel injector nozzles (both gasoline and diesel) - manufacture of semiconductor test components in alumina, silicon nitride or VespelTM - dicing and scribing silicon and sapphire wafers - drilling micro nozzles for microfluidic applications Oxford lasers team of specialist engineers can offer cost effective sub-contract micromachining services for batches of just few parts per month or many thousands of parts per week - all produced with equal care and precision.
Sub-contracting customers can take advantage of the latest infrared, visible and UV lasers with multi-axis part manipulation.
Trepanning heads, optical and electron microscopes, vision systems for part location, and CAD/CAM file conversion are all available for: - micro hole drilling: holes down to 1 micron diameter can be drilled in almost any material including stainless steel, hardened steel, refractory materials, ceramics, diamond, polyimide and ABS - micro cutting: cut widths down to 5 microns in almost any material - micro milling: feature sizes down to 5 microns Typical applications include: - production of bio-medical micro parts - drilling holes in chemical sensors - manufacture of fuel injector nozzles (both gasoline and diesel) - manufacture of semiconductor test components in alumina, silicon nitride or VespelTM - dicing and scribing silicon and sapphire wafers - drilling micro nozzles for microfluidic applications Oxford lasers team of specialist engineers can offer cost effective sub-contract micromachining services for batches of just few parts per month or many thousands of parts per week - all produced with equal care and precision.
Thursday, December 21, 2006
Ultra high precision medical pressings in the UK
A not so traditional Black Country 'metalbasher' is now manufacturing five precision metal pressings for Pfizer's revolutionary new insulin dispense system and providing a service to other international customers, too, as a World-class supplier to the medical industry. Pfizer's device for pulmonary delivery is claimed to provide the first non-injectable form of insulin available since the discovery of the drug in the 1920's. As its guiding principle for 60 years, Clamason Industries of Kingswinford near Stourbridge has always been prepared to refocus and diversify towards new areas of technical innovation and market growth, correspondingly investing in its manufacturing facilities to fulfil those needs.
In three years up to the end of 2007, the leading-edge medical industry will have grown from a negligible amount to some 30% of the company's turnover, second in value only to its first-tier automotive engineering contracts.
Clamason's five pressings - two in 5052 grade aluminium alloy and three in 301 grade stainless steel - are for Pfizer's ground-breaking insulin delivery system via the lungs.
It dispenses a dry powder, synthesized insulin called Exubera, the first inhalable insulin set to become available on the mass market.
Exubera is inhaled before taking food and acts rapidly and effectively.
Pulmonary delivery has been in development for a number of years.
It offers a potential alternative to injections, which may subject diabetes patients (including the many needle phobics) to risk and discomfort.
Reducing a reliance on subcutaneous injection is more patient compatible, clearly lessening pain and the possibility of infection.
The charity Diabetes UK estimates that 2.1 million people in Britain have the condition.
It is reckoned that nearly 230 million people worldwide have diabetes, and the global figure is expected to rise to 350 million by 2025.
If uncontrolled, diabetes can lead to a number of complications including blindness, heart disease, stroke, kidney failure and nerve damage.
Already the complications of diabetes cost the NHS approximately �5 billion a year.
The new device allows adult patients with Type 1 and Type 2 diabetes to breathe in their insulin as powder from a handy blister pack rather than inject it.
The action of loading the drug primes the pump, so that no propellant is necessary.
Appliance and molecular powder formulation - including ironically the use of sugars to carry the drug - were developed by designers Nektar Therapeutics (www.nektar.com) for the Exubera insulin produced in a joint development program between the pharmaceutical giants Pfizer and Sanofi-Aventis.
It is now manufactured and sold exclusively by Pfizer.
The plastic injection mouldings are made and final assembly of the Exubera inhaler is performed by Clamason's UK customer, Bespak plc at their custom-built facility in Milton Keynes (www.bespak.com), and US customer, the Tech Group, Inc which includes a 50,000 sq ft, contract injection moulding facility for medical products at Tempe, Arizona (www.techgroup.com).
Bespak, a fast-growing British technology company, is quoted on the London Stock Exchange and has been providing dispense solutions for the pharmaceutical, medical, health and personal care sectors for more than 40 years.
As a World leader in the production of pressurised metered dose inhalers, Bespak's appointment as principal contractor on the Exubera inhaler project was an obvious one.
The five Clamason pressings in the Exubera device are as follows.
Manufactured in 5052 grade aluminium alloy are a mainframe assembly (with two stainless steel studs outsourced and assembled by Clamason) and a link pump handle.
In 301 grade stainless steel come three further parts - a blister retainer, a customised flat washer (replacing an off-the-shelf version) and a transjector punch.
In three years up to the end of 2007, the leading-edge medical industry will have grown from a negligible amount to some 30% of the company's turnover, second in value only to its first-tier automotive engineering contracts.
Clamason's five pressings - two in 5052 grade aluminium alloy and three in 301 grade stainless steel - are for Pfizer's ground-breaking insulin delivery system via the lungs.
It dispenses a dry powder, synthesized insulin called Exubera, the first inhalable insulin set to become available on the mass market.
Exubera is inhaled before taking food and acts rapidly and effectively.
Pulmonary delivery has been in development for a number of years.
It offers a potential alternative to injections, which may subject diabetes patients (including the many needle phobics) to risk and discomfort.
Reducing a reliance on subcutaneous injection is more patient compatible, clearly lessening pain and the possibility of infection.
The charity Diabetes UK estimates that 2.1 million people in Britain have the condition.
It is reckoned that nearly 230 million people worldwide have diabetes, and the global figure is expected to rise to 350 million by 2025.
If uncontrolled, diabetes can lead to a number of complications including blindness, heart disease, stroke, kidney failure and nerve damage.
Already the complications of diabetes cost the NHS approximately �5 billion a year.
The new device allows adult patients with Type 1 and Type 2 diabetes to breathe in their insulin as powder from a handy blister pack rather than inject it.
The action of loading the drug primes the pump, so that no propellant is necessary.
Appliance and molecular powder formulation - including ironically the use of sugars to carry the drug - were developed by designers Nektar Therapeutics (www.nektar.com) for the Exubera insulin produced in a joint development program between the pharmaceutical giants Pfizer and Sanofi-Aventis.
It is now manufactured and sold exclusively by Pfizer.
The plastic injection mouldings are made and final assembly of the Exubera inhaler is performed by Clamason's UK customer, Bespak plc at their custom-built facility in Milton Keynes (www.bespak.com), and US customer, the Tech Group, Inc which includes a 50,000 sq ft, contract injection moulding facility for medical products at Tempe, Arizona (www.techgroup.com).
Bespak, a fast-growing British technology company, is quoted on the London Stock Exchange and has been providing dispense solutions for the pharmaceutical, medical, health and personal care sectors for more than 40 years.
As a World leader in the production of pressurised metered dose inhalers, Bespak's appointment as principal contractor on the Exubera inhaler project was an obvious one.
The five Clamason pressings in the Exubera device are as follows.
Manufactured in 5052 grade aluminium alloy are a mainframe assembly (with two stainless steel studs outsourced and assembled by Clamason) and a link pump handle.
In 301 grade stainless steel come three further parts - a blister retainer, a customised flat washer (replacing an off-the-shelf version) and a transjector punch.
Wednesday, December 20, 2006
Pioneering shielding can for TV sets
Privately owned British precision pressings manufacturer Clamason Industries of Kingswinford, West Midlands, is manufacturing a top and bottom RFI shielding can to house the digital tuner integrated into the latest 42in and 50in plasma TV sets being made for the UK and European markets by Pioneer GB at Castleford, West Yorkshire. The cover of tin-plated and the base of zinc-plated mild steel are essential for picture quality to shield against radio frequency interference (RFI) and electromagnetic interference (EMI). Clamason delivers the RFI screening cans in pairs on a JIT basis to Pioneer GB, always filling a timed delivery slot on a specific day.
Meanwhile plasma screens are flown in from one of the Pioneer Corporation's three plants in Japan for the sets to be built at Castleford - at a daily rate of up to 1800 units, 75% of which are expected to consist of the state-of-the-art 42in model.
The highly successful British operation employs 400 workers in a 12,000 sq ft factory and runs three assembly lines working 24/7, as it strives to meet the fast-expanding demand from retail and business sectors for the Pioneer and NEC brands which it manufactures.
Pioneer came to Clamason Industries as an alternative UK supplier able to meet all the necessary quality requirements and standards when their previous supplier Sharp Precision Manufacturing (UK) shut down its stamping operation at Wrexham.
In fact the current wave of press shop closures across Britain has meant that business is booming for Clamason, to the extent that this 'lean manufacturer' has quoted for a record �20m worth of presswork, and enjoyed record sales, in the first quarter of 2006.
Clamason has been able to intervene and help household names like Pioneer in part because of its successful track record of having made the original BSkyB decoder box for Pace in the mid-1990's, for which major project it installed a special Chin Fong Worcester transfer press line from Taiwan.
That line of six presses located together provides rapid transfer of pressings between stations by pick-and-place robots with careful handling.
The system allows the manufacture of highly complex parts with no carry strip and the automatic insertion of other components and has the facility to reverse the burr side automatically within the process.
It is ideally suited to complex and intricate set top box applications where the maintenance of excellent surface quality is an essential consideration.
Above and beyond other home entertainments uses (such as DVR bases and Sky and Freeview boxes) for Thomson Broadcast UK and Panasonic, Clamason makes similar RFI shielding components for automotive multinationals.
Those pressings are engine control unit (ECU) enclosures for its first-tier customers Delphi Worldwide (on a variety of vehicles assembled in Europe, Asia and Central America), Motorola ACES (soon to become Continental AG) in North America and France, and Hitachi Europe (on the Nissan Micra and Renault Clio).
Furthermore, in order to ease JIT deliveries to the Central European factories both of automotive first-tier suppliers such as Delphi and TRW and of home entertainments OEMs such as Panasonic and Thomson, Clamason Industries has opened a 10,000 sq ft satellite plant with a �300,000 investment at Nitra, on the motorway network 80km east of Bratislava, capital of Slovakia.
Meanwhile plasma screens are flown in from one of the Pioneer Corporation's three plants in Japan for the sets to be built at Castleford - at a daily rate of up to 1800 units, 75% of which are expected to consist of the state-of-the-art 42in model.
The highly successful British operation employs 400 workers in a 12,000 sq ft factory and runs three assembly lines working 24/7, as it strives to meet the fast-expanding demand from retail and business sectors for the Pioneer and NEC brands which it manufactures.
Pioneer came to Clamason Industries as an alternative UK supplier able to meet all the necessary quality requirements and standards when their previous supplier Sharp Precision Manufacturing (UK) shut down its stamping operation at Wrexham.
In fact the current wave of press shop closures across Britain has meant that business is booming for Clamason, to the extent that this 'lean manufacturer' has quoted for a record �20m worth of presswork, and enjoyed record sales, in the first quarter of 2006.
Clamason has been able to intervene and help household names like Pioneer in part because of its successful track record of having made the original BSkyB decoder box for Pace in the mid-1990's, for which major project it installed a special Chin Fong Worcester transfer press line from Taiwan.
That line of six presses located together provides rapid transfer of pressings between stations by pick-and-place robots with careful handling.
The system allows the manufacture of highly complex parts with no carry strip and the automatic insertion of other components and has the facility to reverse the burr side automatically within the process.
It is ideally suited to complex and intricate set top box applications where the maintenance of excellent surface quality is an essential consideration.
Above and beyond other home entertainments uses (such as DVR bases and Sky and Freeview boxes) for Thomson Broadcast UK and Panasonic, Clamason makes similar RFI shielding components for automotive multinationals.
Those pressings are engine control unit (ECU) enclosures for its first-tier customers Delphi Worldwide (on a variety of vehicles assembled in Europe, Asia and Central America), Motorola ACES (soon to become Continental AG) in North America and France, and Hitachi Europe (on the Nissan Micra and Renault Clio).
Furthermore, in order to ease JIT deliveries to the Central European factories both of automotive first-tier suppliers such as Delphi and TRW and of home entertainments OEMs such as Panasonic and Thomson, Clamason Industries has opened a 10,000 sq ft satellite plant with a �300,000 investment at Nitra, on the motorway network 80km east of Bratislava, capital of Slovakia.
Tuesday, December 19, 2006
Heat exchanger benefits from welding technique
Carr's Welding Technologies have developed a welding procedure for the manufacture of a flat heat exchanger for A K Industries . The Under-shower-tray-heat-exchanger takes out heat from the waste-water from the shower and pre-heats the cold water coming in to the shower, thus saving money and energy, of course. Carr's make the 4 part heat exchanger on their big Trumpf CW robot welding laser, which welds the 2 thin sheets of stainless steel together.
The complicated path welded into the sheet is then subject to a further process to create a lattice of water ways.
Mains cold water is fed through this heat exchanger and the warm waste water from the shower flows over the surface.
This has the effect of pre-heating the incoming water so that the instant shower element does not have to work as hard.
Thereby reducing energy consumption by the shower.
The Development programme carried out by Carr's over the summer, has perfected the art of jigging and welding the thin steel sheets together, so that good penetration is achieved all round the part.
Running at 2.5metres per minute the 5 metre weld path is welded in under 2 minutes.
The product is then leak tested and then packed for shipment to A K Industries of Hereford who complete the heat exchanger with the plastic surround and all the fittings.
This simple patented design, has been entered into a national competition for best energy saving product of the year and has been short listed for the final round of judging.
The complicated path welded into the sheet is then subject to a further process to create a lattice of water ways.
Mains cold water is fed through this heat exchanger and the warm waste water from the shower flows over the surface.
This has the effect of pre-heating the incoming water so that the instant shower element does not have to work as hard.
Thereby reducing energy consumption by the shower.
The Development programme carried out by Carr's over the summer, has perfected the art of jigging and welding the thin steel sheets together, so that good penetration is achieved all round the part.
Running at 2.5metres per minute the 5 metre weld path is welded in under 2 minutes.
The product is then leak tested and then packed for shipment to A K Industries of Hereford who complete the heat exchanger with the plastic surround and all the fittings.
This simple patented design, has been entered into a national competition for best energy saving product of the year and has been short listed for the final round of judging.
Monday, December 18, 2006
Manufacturer specialises in laser cutting
Leading midlands manufacturer Moseley Brothers has announced the launch of a new subsidiary specialising in laser cutting. The new company, gf laser, has been set up to capitalise on an increasing need for low volume and prototype parts. Significant investment has been made by gf laser in the latest Trumpf cutting technology including a TLC Cut 5 machine, only the second of its kind in the UK.
The Cut 5 has the ability to cut 3D parts as well as traditional flatbed, it also uses a dedicated programming system that calculates cutting paths for optimal material utilisation.
The new venture is operating from dedicated, modern premises in the West Midlands and neighbours the existing site of Moseley Brothers.
This means it is able to work on an autonomous basis but still offer clients a mixed facility of machining methods when required.
Simon Tregillus, Commercial Director of gf laser commented 'There are numerous companies able to provide laser cutting but only a handful are able to offer a three dimensional service.
In addition, clients of gf laser can benefit from other services offered by the group such as toolmaking and part production'.
Laser cutting is used in a variety of different industries from aerospace to commercial catering equipment.
The Cut 5 has the ability to cut 3D parts as well as traditional flatbed, it also uses a dedicated programming system that calculates cutting paths for optimal material utilisation.
The new venture is operating from dedicated, modern premises in the West Midlands and neighbours the existing site of Moseley Brothers.
This means it is able to work on an autonomous basis but still offer clients a mixed facility of machining methods when required.
Simon Tregillus, Commercial Director of gf laser commented 'There are numerous companies able to provide laser cutting but only a handful are able to offer a three dimensional service.
In addition, clients of gf laser can benefit from other services offered by the group such as toolmaking and part production'.
Laser cutting is used in a variety of different industries from aerospace to commercial catering equipment.
Sunday, December 17, 2006
Latest 3D laser cutter added to service
gf laser has announced that it has made a significant investment in the latest 5 axis Trumpf Laser Cutting machinery. This means they will be able to provide laser cutting of 3D workpieces and traditional flat components. The TLC Laser Cut 5 is only the second machine of its kind to be supplied by Trumpf in the United Kingdom.
The machine benefits from utilising a customised 3D programming system - ToPs 800.
This ensures that the laser and the programming system are optimally tailored to one another.
Simon Tregillus, Commercial Director of gf laser, commented 'We're delighted to widen the group's ability to provide 3D Laser cutting.
This investment underlines our commitment to provide a wide range of manufacturing services to existing and prospective clients
The machine benefits from utilising a customised 3D programming system - ToPs 800.
This ensures that the laser and the programming system are optimally tailored to one another.
Simon Tregillus, Commercial Director of gf laser, commented 'We're delighted to widen the group's ability to provide 3D Laser cutting.
This investment underlines our commitment to provide a wide range of manufacturing services to existing and prospective clients
Saturday, December 16, 2006
Move to new premises for laser cutting service
gf laser has moved into a modern production facility housing some of its latest laser technology. The recently refurbished premises were chosen specifically for their suitability for laser cutting as they provide a clean and spacious working environment. Furthermore, the unit has ample office space for the programming team and is an ideal location for client meetings.
Simon Tregillus, Commercial Director of gf laser, said 'We're delighted to have secured a high quality unit of this calibre, as well as being close to the other companies within the group we are on a trading estate that has 24 hour manned security.
Undoubtedly, working in this environment will help us in our drive to become one of the top laser cutting companies in the UK'.
Simon Tregillus, Commercial Director of gf laser, said 'We're delighted to have secured a high quality unit of this calibre, as well as being close to the other companies within the group we are on a trading estate that has 24 hour manned security.
Undoubtedly, working in this environment will help us in our drive to become one of the top laser cutting companies in the UK'.
Friday, December 15, 2006
Versatile rods gas-weld non-ferrous metals
Versatile rods gas-weld non-ferrous metals As well as gas-welding welding aluminium, welding rods can be used to weld almost all other non-ferrous metals and alloys - and galvanised steel and between dissimilar non-ferrous metals. Welding aluminium, usually a difficult task requiring expensive equipment and high levels of skill, is fast and straightforward with the revolutionary new Durafix Easyweld aluminium welding rods from Durafix. In addition to aluminium, the rods can also be used to weld almost all other non-ferrous metals and alloys - they can even be used to produce strong welded joints in galvanised steel and between dissimilar non-ferrous metals.
No special equipment is needed to make welds with Easyweld rods - their low working temperature of just 392 deg C means that they can be used in conjunction with almost any ordinary hand-held blow torch.
For the convenience of new users, Durafix offers the rods in the form of inexpensive kits, complete with a high-quality auto- or manual-ignition torch.
For users who already have a suitable torch, Easyweld rods can also be purchased separately, in a wide range of pack sizes.
Despite their convenience and ease of use, Easyweld rods produce dependable non-porous joints which are stronger than the parent metal, and which are entirely free from slag.
The quality and performance of the rods is confirmed by the US Army Engineering Corp, which has approved them under specification number MIL-R-4208 for use in an extensive range of military applications, including the repair of aircraft skins.
Among the many other applications for Easyweld rods are aluminium boat repair, which is usually impossible with conventional processes because of the thin gauge of the metal used for boat hulls; repair of die-cast components, which is also in most cases uneconomic by conventional means; and the maintenance of radiators, heat exchangers and cooling systems.
Because there are no toxicity hazards associated with the Easyweld process, it is equally suitable for use in domestic, workshop and industrial environments.
Whatever metals are being joined, the unique formulation of the Easyweld rods completely eliminates problems with oxidation at the weld, without the use of flux.
Not only does this mean that dependable joints can be readily produced even by users with no previous welding experience, it also avoids the environmental problems associated with the aggressive flux materials used in many other welding processes.
As well as being simple, safe and convenient, Easyweld system is also exceptionally economical.
No special equipment is needed to make welds with Easyweld rods - their low working temperature of just 392 deg C means that they can be used in conjunction with almost any ordinary hand-held blow torch.
For the convenience of new users, Durafix offers the rods in the form of inexpensive kits, complete with a high-quality auto- or manual-ignition torch.
For users who already have a suitable torch, Easyweld rods can also be purchased separately, in a wide range of pack sizes.
Despite their convenience and ease of use, Easyweld rods produce dependable non-porous joints which are stronger than the parent metal, and which are entirely free from slag.
The quality and performance of the rods is confirmed by the US Army Engineering Corp, which has approved them under specification number MIL-R-4208 for use in an extensive range of military applications, including the repair of aircraft skins.
Among the many other applications for Easyweld rods are aluminium boat repair, which is usually impossible with conventional processes because of the thin gauge of the metal used for boat hulls; repair of die-cast components, which is also in most cases uneconomic by conventional means; and the maintenance of radiators, heat exchangers and cooling systems.
Because there are no toxicity hazards associated with the Easyweld process, it is equally suitable for use in domestic, workshop and industrial environments.
Whatever metals are being joined, the unique formulation of the Easyweld rods completely eliminates problems with oxidation at the weld, without the use of flux.
Not only does this mean that dependable joints can be readily produced even by users with no previous welding experience, it also avoids the environmental problems associated with the aggressive flux materials used in many other welding processes.
As well as being simple, safe and convenient, Easyweld system is also exceptionally economical.
Thursday, December 14, 2006
Plasma-arc cutter is for manual operation
Plasma-arc cutter is for manual operation At EuroBLECH, visitors can see a compact plasma-arc cutting tool which is portable yet powerful enough to efficiently cut through up to 10mm metals. Hypertherm has announced that it will unveil a new compact plasma cutting tool at the euroblech exhibition held October 23-29 in Hannover, Germany. The new tool is the latest addition to the Powermax family and combines compact size, low weight, minimal energy usage, with superior cutting power and quality.
The unit is small and light enough for an operator to carry while operating yet powerful enough to efficiently cut through a maximum 10mm (3/8in) metal up to ten times faster than oxy-fuel gas or other traditional methods.
It is ideal for a wide range of metal cutting applications in industries such as automotive, aviation, construction, farming, site maintenance, HVAC, and any other industry requiring flexible, 'on-the-spot' metal working.
Visitors to EuroBLECH can view live demonstrations of this new technology in Hall 13 Stand D54.
'EuroBLECH is an ideal show for us to stage the worldwide launch of this product,' said Bruce Altobelli, business team leader, Manual Systems, Hypertherm.
'This exhibition allows us to reach important industries that depend on efficient metal cutting technologies.
Our new system will certainly live up to the high expectations of EuroBLECH visitors who expect to see the latest leading edge technology.' Hypertherm's new compact cutting tool will feature many of the benefits of the company's other manual cutting systems.
These include low voltage, enhanced safety features, and minimal operating costs.
* About Hypertherm - for over 30 years, Hypertherm has been a pioneer in advanced high temperature metal cutting technologies.
Setting the standard for cut quality and weldability, the company produces a wide range of automated and manually operated laser and plasma-arc cutting systems.
Under the leadership of Hypertherm's founder, Richard W Couch, Jr, the company has grown from two associates working from a small garage to a worldwide organization with over 700 associates working in locations globally.
The unit is small and light enough for an operator to carry while operating yet powerful enough to efficiently cut through a maximum 10mm (3/8in) metal up to ten times faster than oxy-fuel gas or other traditional methods.
It is ideal for a wide range of metal cutting applications in industries such as automotive, aviation, construction, farming, site maintenance, HVAC, and any other industry requiring flexible, 'on-the-spot' metal working.
Visitors to EuroBLECH can view live demonstrations of this new technology in Hall 13 Stand D54.
'EuroBLECH is an ideal show for us to stage the worldwide launch of this product,' said Bruce Altobelli, business team leader, Manual Systems, Hypertherm.
'This exhibition allows us to reach important industries that depend on efficient metal cutting technologies.
Our new system will certainly live up to the high expectations of EuroBLECH visitors who expect to see the latest leading edge technology.' Hypertherm's new compact cutting tool will feature many of the benefits of the company's other manual cutting systems.
These include low voltage, enhanced safety features, and minimal operating costs.
* About Hypertherm - for over 30 years, Hypertherm has been a pioneer in advanced high temperature metal cutting technologies.
Setting the standard for cut quality and weldability, the company produces a wide range of automated and manually operated laser and plasma-arc cutting systems.
Under the leadership of Hypertherm's founder, Richard W Couch, Jr, the company has grown from two associates working from a small garage to a worldwide organization with over 700 associates working in locations globally.
Wednesday, December 13, 2006
Powerful portable machine bevels plate edges
Model SKF 2023 is the most powerful of a range of seven portable chamfering and bevelling machines available from Surtech. With its 2,5kW electric motor, variable cutting speed from 6500 - 8500 rev/min and the multi-bladed milling head it is the ideal machine for bevelling plate prior to welding. A large bearing guide on the end of the milling head and a large disc support make it easy to move the machine along both straight and contoured edges.
Bevel widths of up to 15mm at 30, 45 and 60 degrees are possible and with the correct choice of milling head and carbide inserts the machine will handle mild steel, stainless steel and aluminium.
Slightly hardened edges from thermal cutting are no problem.
Unlike standard bevelling machines which have milling heads with between one and four inserts Model SKF 2023 has a unique and patented milling head with two rows of eight inserts.
As a result metal removal rates are several times faster and the finish is smoother and more consistent.
Model SKF 2023 comes close in performance and results to dedicated bench and stationary bevelling machines with the benefit of costing considerably less and being more versatile.
Bevel widths of up to 15mm at 30, 45 and 60 degrees are possible and with the correct choice of milling head and carbide inserts the machine will handle mild steel, stainless steel and aluminium.
Slightly hardened edges from thermal cutting are no problem.
Unlike standard bevelling machines which have milling heads with between one and four inserts Model SKF 2023 has a unique and patented milling head with two rows of eight inserts.
As a result metal removal rates are several times faster and the finish is smoother and more consistent.
Model SKF 2023 comes close in performance and results to dedicated bench and stationary bevelling machines with the benefit of costing considerably less and being more versatile.
Tuesday, December 12, 2006
Self-propelling bevelling tool prepares plate
Surtech's Model 800 is used for high speed weld preparation of mild steel, stainless steel and aluminium plate from 5mm to 40mm thick. The 100mm dia. rotary shearing tool is driven by a 1,5kW, 2800 rev/min motor and operates virtually without noise at feed speeds up to 1500mm per minute.
It lasts up to 2000m, depending on bevel widths and material.
When worn it can be re-sharpened.
The max.
bevel width is approx.
15mm at angles from 15 to 50 deg.
While bevelling the machine propels itself along the edge of long plates without any effort by the operator.
Model 800 will also hold smaller parts without the operator having to support it.
It lasts up to 2000m, depending on bevel widths and material.
When worn it can be re-sharpened.
The max.
bevel width is approx.
15mm at angles from 15 to 50 deg.
While bevelling the machine propels itself along the edge of long plates without any effort by the operator.
Model 800 will also hold smaller parts without the operator having to support it.
Monday, December 11, 2006
Slag grinder can replace up to six angle grinders
Surtech's Model LS 90 Slag Grinder offers an outstanding price versus performance ratio. One person using the LS90 can deslag as many flame cut blanks as up to six persons with angle grinders. This is possible because of the superior grinding ability of Model LS 90 and the considerably reduced handling.
Model LS90 consists of a table approx.
2000mm long and 800mm wide, an overhead abrasive belt head with a contact wheel carriage and electrical controls for motorised vertical table travel and for a two speed or reversible abrasive belt drive.
Flame cut blanks are laid out on the table.
By moving the contact wheel carriage left to right and right to left and the table back or forth all blanks can be ground in one operation.
The 6HP belt drive motor has ample power for even the toughest burr and the 6000mm long belt guarantees long life and little down time due to belt changes.
The Slag Grinder can be viewed and tested at Surtech's Abrasive Test Centre in Birmingham.
Model LS90 consists of a table approx.
2000mm long and 800mm wide, an overhead abrasive belt head with a contact wheel carriage and electrical controls for motorised vertical table travel and for a two speed or reversible abrasive belt drive.
Flame cut blanks are laid out on the table.
By moving the contact wheel carriage left to right and right to left and the table back or forth all blanks can be ground in one operation.
The 6HP belt drive motor has ample power for even the toughest burr and the 6000mm long belt guarantees long life and little down time due to belt changes.
The Slag Grinder can be viewed and tested at Surtech's Abrasive Test Centre in Birmingham.
Sunday, December 10, 2006
Cranable unit cuts plate edge bevels in-situ
Model ASO 900 bridges the gap between portable and stationary bevelling machines. When parts are too large to handle and required bevels too wide for portable machines Model ASO fits the bill. At approx.
85kg it needs to be lifted into place with the help of a crane but once in position it is self propelled and can easily be controlled manually.' For smaller parts it can be mounted on a wheeled carriage allowing parts to be hand fed.
The powerful 2.2kW motor combined with the 63mm diameter milling head will bevel mild steel 8mm wide in a single pass and up to a max.
of 40mm wide in several passes.
Feed rate is approx.
600mm/min.
Bevel angles are adjustable from 15 to 45 degrees.
Model ASO 900 uses milling cutters to produce smoother bevels than machines with rotary shearing tools.
Surtech offer more than a dozen portable, transportable and stationary machines for producing bevels prior to welding.
85kg it needs to be lifted into place with the help of a crane but once in position it is self propelled and can easily be controlled manually.' For smaller parts it can be mounted on a wheeled carriage allowing parts to be hand fed.
The powerful 2.2kW motor combined with the 63mm diameter milling head will bevel mild steel 8mm wide in a single pass and up to a max.
of 40mm wide in several passes.
Feed rate is approx.
600mm/min.
Bevel angles are adjustable from 15 to 45 degrees.
Model ASO 900 uses milling cutters to produce smoother bevels than machines with rotary shearing tools.
Surtech offer more than a dozen portable, transportable and stationary machines for producing bevels prior to welding.
Saturday, December 9, 2006
Portable weld prepping tools produce 15mm bevels
Surtech's SKF range of portable bevelling tools is claimed to be the fastest and most powerful available anywhwere. Whilst traditional bevelling tools have milling heads with 2 or 3 carbide inserts set at a fixed 45 degrees, SKF tools feature patented milling heads with 5 inserts at angles of between 10 - 80 degrees. As a result SKF tools will bevel up to a width of approx.
6mm in a single pass and up to a max.
of 15mm in three passes.
Faster and with a smoother finish than any other portable bevelling tool.
A 140mm dia support disc and a 28mm dia bearing guide allow accurate tracking of straight and contoured edges as well as holes with a min.
dia of 30mm.
There are five machines in the SKF range.
With motors from 1.2kW To 2.6kW, some with variable speeds suitable for all metals from aluminium to mild steel and from stainless steel to tool steels.
SKF machines can be viewed and tested at Surtech's Abrasive Test Centre or demonstrated in your works.
6mm in a single pass and up to a max.
of 15mm in three passes.
Faster and with a smoother finish than any other portable bevelling tool.
A 140mm dia support disc and a 28mm dia bearing guide allow accurate tracking of straight and contoured edges as well as holes with a min.
dia of 30mm.
There are five machines in the SKF range.
With motors from 1.2kW To 2.6kW, some with variable speeds suitable for all metals from aluminium to mild steel and from stainless steel to tool steels.
SKF machines can be viewed and tested at Surtech's Abrasive Test Centre or demonstrated in your works.
Friday, December 8, 2006
Plate machining systems combined in one
TIPO B251 is an automatic CNC line for the processing of plates of medium to heavy thickness. Its working range is very wide and goes from punching, drilling, milling and pointing to marking and shearing (also in shapes) using oxy-fuel gas cutting and plasma-arc cutting systems. The plates are processed in a single step, so performing several operations automatically reduces working costs and material handling.
Polygonal or shaped plates are processed with accuracy at reduced production costs.
TIPO B251 can process plates up to 2540mm wide and 6000mm long (longer lengths are optional).
The hydraulic punching unit is fitted with a single punch and an automatic plate hold-down.
The line can profile shapes and they can be automatically unloaded using a device with a capacity of 2500mm x 500mm.
The TIPO B251 is an upgraded version of Ficep's earlier TIPO B machine and has the following innovations: * Punching operations are performed using a punching tool with punch, die and positive stripper integrated such that the best punching quality is achieved.
The circular stripper holds and clamps the material evenly and constantly.
* The line can be fitted with an automatic tool changer having four, eight or 14 tool holders in a shuttle system.
* Thanks to the use of special valves, the punching cycle is very fast - reaching 1s/cycle.
* The line can drill (also combined with oxy-fuel gas cutting) plates up to 100mm thick (minimum thickness is 6mm).
It can process plates up to 10 tonnes and punch up to 25mm thickness (also combined with plasma-arc cutting).
These features are assisted by the design of the roller ways and the 'master' and 'slave' carriages, which are electronically synchronised, thus keeping the feeding of the plate always aligned along the X-axis.
In this way, it is possible to process with accuracy bent plates and plates with uneven edges.
* It is possible to perform milling operations not only inside the shaped plates but also along their external profile, to produce bevels for weld preparation.
* The datum line can be programmed according to needs and does not need any horizontal hold-downs.
* Thanks to the plasma-arc cutting system - a modified Hypertherm HT 2000 HS system - it is possible to reach cutting speeds 20% higher than earlier machines and the TIPO B251 achieves a considerably better cutting quality.
Polygonal or shaped plates are processed with accuracy at reduced production costs.
TIPO B251 can process plates up to 2540mm wide and 6000mm long (longer lengths are optional).
The hydraulic punching unit is fitted with a single punch and an automatic plate hold-down.
The line can profile shapes and they can be automatically unloaded using a device with a capacity of 2500mm x 500mm.
The TIPO B251 is an upgraded version of Ficep's earlier TIPO B machine and has the following innovations: * Punching operations are performed using a punching tool with punch, die and positive stripper integrated such that the best punching quality is achieved.
The circular stripper holds and clamps the material evenly and constantly.
* The line can be fitted with an automatic tool changer having four, eight or 14 tool holders in a shuttle system.
* Thanks to the use of special valves, the punching cycle is very fast - reaching 1s/cycle.
* The line can drill (also combined with oxy-fuel gas cutting) plates up to 100mm thick (minimum thickness is 6mm).
It can process plates up to 10 tonnes and punch up to 25mm thickness (also combined with plasma-arc cutting).
These features are assisted by the design of the roller ways and the 'master' and 'slave' carriages, which are electronically synchronised, thus keeping the feeding of the plate always aligned along the X-axis.
In this way, it is possible to process with accuracy bent plates and plates with uneven edges.
* It is possible to perform milling operations not only inside the shaped plates but also along their external profile, to produce bevels for weld preparation.
* The datum line can be programmed according to needs and does not need any horizontal hold-downs.
* Thanks to the plasma-arc cutting system - a modified Hypertherm HT 2000 HS system - it is possible to reach cutting speeds 20% higher than earlier machines and the TIPO B251 achieves a considerably better cutting quality.
Thursday, December 7, 2006
Portable unit cuts tube precisely on-site
Orbimatic (UK), the manufacturers of high quality automatic welding equipment have introduced the PS 4.5 Tube Cutting Machine into their product range which has been designed and developed for on-site use. The PS 4.5 is manufactured by Georg Fischer Piping Systems and works using the same 'Orbital Cutting' principle as the industry proven RA range of cutting machines. All Georg Fischer cutting machines use variable speed high powered motor units with a rotating carbide cutting blade to give high precision cut.
This system allows the PS 4.5 to be used prior to Orbital Welding application with no extra preparation work need on the tube end.
A simple cam system is used to introduce the cutting blade into the tube accurately and gently prior to the cutting process.
Because the cutting blade is introduced to the material gently its life expectancy will be extended.
Weighing in at only 19kg, the PS 4.5 is ideal for applications where it needs to be transported form one working area to another.
This system allows the PS 4.5 to be used prior to Orbital Welding application with no extra preparation work need on the tube end.
A simple cam system is used to introduce the cutting blade into the tube accurately and gently prior to the cutting process.
Because the cutting blade is introduced to the material gently its life expectancy will be extended.
Weighing in at only 19kg, the PS 4.5 is ideal for applications where it needs to be transported form one working area to another.
Wednesday, December 6, 2006
Tube end preparation machine is cordless
Tube end preparation machine is cordless Tube end preparation machine is a cordless tube end squaring machine which can be used to produce a perfect weld preparation on tubes from 3mm to 38.1mm outside diameter. Orbimatic UK Limited, the manufacturers of high quality automatic welding equipment have introduced the Georg Fischer RPG 1.5B tube end preparation machine to their range. The RPG 1.5B is a cordless tube end squaring machine which can be used to produce a perfect weld preparation on tubes from 3mm to 38.1mm outside diameter.
The RPG 1.5B uses a carbide cutting tip, which is rotated and introduced to the tube end via a micrometer control to allow accurate material removal.
This combination ensures that tube ends are left perfectly square and with no burrs.
The precise profile of the carbide cutting bit ensures that the swarf produce curls away from tube face externally, which allows the RPG 1.5B to be used with electro-polished tubes.
A range of collets and tools allow the RPG 1.5B to be used for most applications including the facing and reclaiming of used micro-fittings.
The RPG 1.5B uses a carbide cutting tip, which is rotated and introduced to the tube end via a micrometer control to allow accurate material removal.
This combination ensures that tube ends are left perfectly square and with no burrs.
The precise profile of the carbide cutting bit ensures that the swarf produce curls away from tube face externally, which allows the RPG 1.5B to be used with electro-polished tubes.
A range of collets and tools allow the RPG 1.5B to be used for most applications including the facing and reclaiming of used micro-fittings.
Tuesday, December 5, 2006
3D cutting system machines weld preps
Boiler making demands the assembly of complex components, but before this can be carried out all parts must be prepared as accurately as possible. Three dimensional parts such as pipes and dished ends can be particularly difficult and for high quality bevel and profile cutting of these components, ESAB Automation has introduced the VBA Wrist. This innovative 3D process technology can also be used for both normal 2D vertical weld and edge preparation of steel plate.
By totally eliminating manual measuring and manual cutting, as well as reducing workplace handling and post cutting operations, the VBA wrist will appeal to all boiler makers.
In combination with ESAB's Vision Control, extremely small bevel tolerances can be achieved and due to its compact design and low weight, the VBA Wrist can be used with the ESAB Suprarex SXE-P cutting machine.
The VBA Wrist operates on a new patented principle.
In contrast to conventional systems, the tool centre point (TCP) of the VBA Wrist remains fixed in space during swivelling.
Its high accuracy adapts perfectly to every cutting task and its integration into CNC cutting machines provides uncomplicated control of the cutting process.
Cutting parameters are automatically set for various material thicknesses as well as bevel angles, significantly reducing programming requirements.
Exactly repeated cycles in bevel cutting for X and Y cuts provide the highest cutting quality even on complex geometrics.
By totally eliminating manual measuring and manual cutting, as well as reducing workplace handling and post cutting operations, the VBA wrist will appeal to all boiler makers.
In combination with ESAB's Vision Control, extremely small bevel tolerances can be achieved and due to its compact design and low weight, the VBA Wrist can be used with the ESAB Suprarex SXE-P cutting machine.
The VBA Wrist operates on a new patented principle.
In contrast to conventional systems, the tool centre point (TCP) of the VBA Wrist remains fixed in space during swivelling.
Its high accuracy adapts perfectly to every cutting task and its integration into CNC cutting machines provides uncomplicated control of the cutting process.
Cutting parameters are automatically set for various material thicknesses as well as bevel angles, significantly reducing programming requirements.
Exactly repeated cycles in bevel cutting for X and Y cuts provide the highest cutting quality even on complex geometrics.
Monday, December 4, 2006
Quality centre lathe price cut by 40%
The latest 'special edition' Triumph VS2500 variable speed centre lathe is now available from Colchester Sales from just GBP 12,750 a massive price reduction of 40 per cent from the previous model. Based on a world-wide resurgence in the conventional manual machine market for Colchester Lathe and extensive value engineering, the new Triumph has a 7.5kW motor with triple range, variable speed drive giving 14 to 2,500 revs/min. It has a 400 mm swing over the 1250mm long hardened and ground bed and has been regarded internationally as the 'best-known' model of centre lathe.
The machine weighs in at a hefty 1,610kg in standard trim which demonstrates the inherent rigidity of the basic machine design and potential for high accuracy turning tasks.
The price reduction is a result of a swing to traditional centre lathe manufacturers such as Colchester Lathe due to problems of long-term reliability, poor spares and service support and disastrous residual values associated with low cost suppliers over the last five years or so.
This has enabled Colchester Lathe to respond to rising demand especially in workshop, education and training schools and instigate value engineering and competitive sourcing to maintain the level of quality associated with the brand name and make it more affordable.
The machine weighs in at a hefty 1,610kg in standard trim which demonstrates the inherent rigidity of the basic machine design and potential for high accuracy turning tasks.
The price reduction is a result of a swing to traditional centre lathe manufacturers such as Colchester Lathe due to problems of long-term reliability, poor spares and service support and disastrous residual values associated with low cost suppliers over the last five years or so.
This has enabled Colchester Lathe to respond to rising demand especially in workshop, education and training schools and instigate value engineering and competitive sourcing to maintain the level of quality associated with the brand name and make it more affordable.
Sunday, December 3, 2006
Demand for centre lathes brings prices down
A dramatic turnaround in the demand for conventional lathes has enabled a lathe builder to reduce the price of selected models in its centre lathe range by up to 40 per cent.
A dramatic turnaround in the demand for conventional lathes which has improved the benefits associated with economies of scale has enabled Colchester Lathe to reduce the price of selected models in its centre lathe range by up to 40 per cent. The new pricing structure is in response to Colchester Lathes' distributors reporting a world-wide resurgence of training schools and workshops who are preferring to buy known brands such as Colchester. This follows bad experiences such as long-term reliability, poor spares and service support and disastrous residual values that are a growing problem associated with the newer breed of low-cost centre lathe suppliers.
The effect of the market shift in Colchester's favour is qualified by a recent surge in demand where some GBP 750,000 worth of centre lathes have been ordered from seven different countries in the Far East, America and Southern Ireland.
According to Sales Director, Mike Dawes: 'Sales of our traditional centre lathes have experienced a dramatic turnaround.
This has motivated us to rationalise machines in the range and certain key component parts while maintaining or improving quality of build.
With orders rising, we have been able to instigate value engineering and more competitive sourcing which also capitalises on the efficient production methods that are well-proven on our two and three-axis Tornado CNC lathe range.' Over the last five years or so, Colchester Lathe has grown its market share with its CNC range of slant bed Tornado and the Combi combination lathe.
Says Mike Dawes: 'Now with the new economies of scale, we have justified a total re-focus on our conventional machines which has resulted in a massive 40 per cent reduction in price on selected models.' When this is added to the world respected name of Colchester, built-up from over a century of centre lathe manufacture and being Europe's biggest lathe builder, distributors have already responded with a growing order book.
A dramatic turnaround in the demand for conventional lathes which has improved the benefits associated with economies of scale has enabled Colchester Lathe to reduce the price of selected models in its centre lathe range by up to 40 per cent. The new pricing structure is in response to Colchester Lathes' distributors reporting a world-wide resurgence of training schools and workshops who are preferring to buy known brands such as Colchester. This follows bad experiences such as long-term reliability, poor spares and service support and disastrous residual values that are a growing problem associated with the newer breed of low-cost centre lathe suppliers.
The effect of the market shift in Colchester's favour is qualified by a recent surge in demand where some GBP 750,000 worth of centre lathes have been ordered from seven different countries in the Far East, America and Southern Ireland.
According to Sales Director, Mike Dawes: 'Sales of our traditional centre lathes have experienced a dramatic turnaround.
This has motivated us to rationalise machines in the range and certain key component parts while maintaining or improving quality of build.
With orders rising, we have been able to instigate value engineering and more competitive sourcing which also capitalises on the efficient production methods that are well-proven on our two and three-axis Tornado CNC lathe range.' Over the last five years or so, Colchester Lathe has grown its market share with its CNC range of slant bed Tornado and the Combi combination lathe.
Says Mike Dawes: 'Now with the new economies of scale, we have justified a total re-focus on our conventional machines which has resulted in a massive 40 per cent reduction in price on selected models.' When this is added to the world respected name of Colchester, built-up from over a century of centre lathe manufacture and being Europe's biggest lathe builder, distributors have already responded with a growing order book.
Saturday, December 2, 2006
Easy-to-use manual/CNC lathe launched in Chicago
Unrivalled ease-of-use features the latest manual/CNC lathe, thanks to its specially developed Fanuc/Harrison control and full-size colour touch-screen. It makes its debut at IMTS.
High capability and exceptional value for money will be the key underlying themes of 600 Group's considerable presence at the forthcoming IMTS show in Chicago. As well as tried and tested products from the Group's celebrated ranges, the show will also provide a backdrop for the launch of a number of exciting new machine tool innovations. 600 Group's major involvement in the show signals its confidence that a gradual recovery in the US machine tool market is now within sight.
Central to 600 Group's IMTS activity will be world's first showing of the new Alpha U 2 manual/CNC lathe from Harrison, offering unrivalled ease-of-use thanks to its specially developed Fanuc/Harrison control and full-size colour touch-screen.
Colchester's driven-tooling equipped Storm 120M and 220M, the US version of its highly successful Tornado turning centre, will also be on show, as will Colchester's Combi K state-of-the-art CNC/manual lathe.
Continuing the theme of high capability will be Pratt Burnerd America's much-publicised Programmable Power Chuck, whose ability to be program-controlled and fully integrated with the parent machine's own control earned it the coveted title of Best workholding equipment at the International machine tool industry Awards in April.
In response to market demand for ever-lower equipment costs, Colchester will unveil the latest incarnation of the world's most famous lathe, the Colchester Triumph centre lathe, complete with infinitely variable spindle speed and now available at the unprecedented and highly competitive price of $20,000.
IMTS will also see the US launch of Richmond Machine Tools' range of high-specification vertical machining centres, as well as Electrox' highly acclaimed Cobra Marker laser marking system and representation from Crawford Collets.
From its own stand at the show, 600 Group company Clausing Industrial will exhibit its extensive range of turning, milling, sa wing and sheet metal products from Group brands Kalamazoo and Metal Muncher.
600 Group Chief Executive, Tony Sweeten, explained, '600 Group's intensive IMTS campaign will focus on a powerful combination of great value machines and those which offer high levels of capability and performance.
The fact that the Group will be so well represented at the show reflects our unswerving faith in this important machine tool market and our long-standing belief that a dynamic and large-scale approach befits a machine tool force of 600 Group's global stature'.
High capability and exceptional value for money will be the key underlying themes of 600 Group's considerable presence at the forthcoming IMTS show in Chicago. As well as tried and tested products from the Group's celebrated ranges, the show will also provide a backdrop for the launch of a number of exciting new machine tool innovations. 600 Group's major involvement in the show signals its confidence that a gradual recovery in the US machine tool market is now within sight.
Central to 600 Group's IMTS activity will be world's first showing of the new Alpha U 2 manual/CNC lathe from Harrison, offering unrivalled ease-of-use thanks to its specially developed Fanuc/Harrison control and full-size colour touch-screen.
Colchester's driven-tooling equipped Storm 120M and 220M, the US version of its highly successful Tornado turning centre, will also be on show, as will Colchester's Combi K state-of-the-art CNC/manual lathe.
Continuing the theme of high capability will be Pratt Burnerd America's much-publicised Programmable Power Chuck, whose ability to be program-controlled and fully integrated with the parent machine's own control earned it the coveted title of Best workholding equipment at the International machine tool industry Awards in April.
In response to market demand for ever-lower equipment costs, Colchester will unveil the latest incarnation of the world's most famous lathe, the Colchester Triumph centre lathe, complete with infinitely variable spindle speed and now available at the unprecedented and highly competitive price of $20,000.
IMTS will also see the US launch of Richmond Machine Tools' range of high-specification vertical machining centres, as well as Electrox' highly acclaimed Cobra Marker laser marking system and representation from Crawford Collets.
From its own stand at the show, 600 Group company Clausing Industrial will exhibit its extensive range of turning, milling, sa wing and sheet metal products from Group brands Kalamazoo and Metal Muncher.
600 Group Chief Executive, Tony Sweeten, explained, '600 Group's intensive IMTS campaign will focus on a powerful combination of great value machines and those which offer high levels of capability and performance.
The fact that the Group will be so well represented at the show reflects our unswerving faith in this important machine tool market and our long-standing belief that a dynamic and large-scale approach befits a machine tool force of 600 Group's global stature'.
Friday, December 1, 2006
Chain tensioner's spring is completely enclosed
A completely enclosed spring in an automatic chain-tensioning device does not deteriorate through dirt ingress and requires neither adjustment nor maintenance.
The new Zetasassi automatic chain-tensioning device from R A Rodriguez is characterised by its completely enclosed spring. Unlike its competitors whose springs are exposed to the rigors of the manufacturing environment, the patented Zetasassi product does not deteriorate through dirt ingress. It therefore promises a much longer service life and requires neither adjustment nor maintenance.
Twelve models complete this new range.
Each device comprises an aluminium body into which run two galvanised steel rods.
Attached to these rods is the tensioning head made from high-density polyethylene.
The new Zetasassi automatic chain-tensioning device from R A Rodriguez is characterised by its completely enclosed spring. Unlike its competitors whose springs are exposed to the rigors of the manufacturing environment, the patented Zetasassi product does not deteriorate through dirt ingress. It therefore promises a much longer service life and requires neither adjustment nor maintenance.
Twelve models complete this new range.
Each device comprises an aluminium body into which run two galvanised steel rods.
Attached to these rods is the tensioning head made from high-density polyethylene.
Thursday, November 30, 2006
Conveyor division rebranded
Wire Belt Co has officially relaunched its conveyor division under the name of ConveyorTec for purposes of worldwide branding. The product range of Flex-Turn units, spreaders and convergers, product shuttles and straight conveyors remain of the same high design quality and product finish and are available through existing channels. The ConveyorTec name has been used for a number of years, principally in Germany to position the product range optimally in the conveying and processing market.
Wednesday, November 29, 2006
Ready set belt fasteners cut splicing time
Ready set staple conveyor-belt fasteners reduce installation time by more than 20 percent compared to conventional staple-attached, hinged-plate splicing in light/medium-duty applications.
Alligator Ready Set Staple conveyor-belt fasteners from Flexco reduce installation time by more than 20 percent compared to conventional staple-attached, hinged-plate splicing in light/medium-duty applications. Supplied as one-piece fastener strips complete with staples pre-inserted in each fastener's top plate, Ready Set Staple eliminates the time-consuming step of either loading a staple-dispenser or manually inserting loose staples into installation tools. Pre-inserted staples also ease maintenance, inventory and purchasing efforts - and help minimize installation errors - by eliminating the need to match staple sizes and quantities to the three standard fastener sizes.
Designed for belts from 1/16 -inch (1.5 mm) to 1/4 -inch (6.4 mm) thick and with mechanical fastener ratings up to 200 PIW (pounds per inch of width) (35kN/m), Ready Set fastener strips are simply fitted onto belt ends and secured in a special guide-block tool.
Hammer-applied, the high-tensile-strength staples penetrate the belt without severing vital carcass fibers and compress plates into belt covers for a tight, evenly distributed grip that resists comb-out, reduces belt fatigue at the point of penetration and ensures long splice life.
Low-profile hinged-plate design with extended reachback enables trouble-free operation under diverters, scrapers and skirtboards and around pulleys as small as 2 inches (50mm) in diameter.
Pre-assembled fastener strips for belt widths from 4-60 inches (100-1500mm) assure a straight, uniformly spaced splice.
Individual fastener plates are joined with breakaway bridges, allowing segments to be easily broken off to trim the strip for any specific belt width.
These separable connections also allow new splices to conform automatically to troughing idlers.
All Alligator Ready Set Staple fasteners are offered in plated steel or stainless steel, for extra resistance to abrasion, rust and corrosion.
Standard Ready Set Staple splice cartons contain all necessary components for four complete splices, including pre-assembled fastener strips and hinge pins.
Additional hinge pins and accessories may be ordered separately.
Alligator Ready Set Staple conveyor-belt fasteners from Flexco reduce installation time by more than 20 percent compared to conventional staple-attached, hinged-plate splicing in light/medium-duty applications. Supplied as one-piece fastener strips complete with staples pre-inserted in each fastener's top plate, Ready Set Staple eliminates the time-consuming step of either loading a staple-dispenser or manually inserting loose staples into installation tools. Pre-inserted staples also ease maintenance, inventory and purchasing efforts - and help minimize installation errors - by eliminating the need to match staple sizes and quantities to the three standard fastener sizes.
Designed for belts from 1/16 -inch (1.5 mm) to 1/4 -inch (6.4 mm) thick and with mechanical fastener ratings up to 200 PIW (pounds per inch of width) (35kN/m), Ready Set fastener strips are simply fitted onto belt ends and secured in a special guide-block tool.
Hammer-applied, the high-tensile-strength staples penetrate the belt without severing vital carcass fibers and compress plates into belt covers for a tight, evenly distributed grip that resists comb-out, reduces belt fatigue at the point of penetration and ensures long splice life.
Low-profile hinged-plate design with extended reachback enables trouble-free operation under diverters, scrapers and skirtboards and around pulleys as small as 2 inches (50mm) in diameter.
Pre-assembled fastener strips for belt widths from 4-60 inches (100-1500mm) assure a straight, uniformly spaced splice.
Individual fastener plates are joined with breakaway bridges, allowing segments to be easily broken off to trim the strip for any specific belt width.
These separable connections also allow new splices to conform automatically to troughing idlers.
All Alligator Ready Set Staple fasteners are offered in plated steel or stainless steel, for extra resistance to abrasion, rust and corrosion.
Standard Ready Set Staple splice cartons contain all necessary components for four complete splices, including pre-assembled fastener strips and hinge pins.
Additional hinge pins and accessories may be ordered separately.
Tuesday, November 28, 2006
Conveyors offer superior strength and capacity
Mk Profile Systems leading supplier of aluminium profiles for machine building and modular conveying systems have further developed their modular plastic slat conveying system SBF-P2000. The increased popularity of mk modular conveyors and their interchangeability with the mk modular aluminium framework system has been recently enhanced with many new profiles, conveyors and other innovations. The mk plastic slat chain conveyor SBF-P2000 uses standard plastic or steel slat chain but has a construction based on a robust 100X50mm solid profile, rather than the thin wall profiles more commonly used.
This together with the extensive use of machined solid wearstrip material gives the SBF-P200 conveyor a strength and capacity significantly higher than other similar systems.
The conveyor has now been developed further to encompass new conveyor widths in addition to the standard 100mm.
New widths of 130mm, 170mm, 205mm and 320mm are now available.
These new conveyor designs increase the physical capacity able to be transported and also reduce the need for multi lane installations, giving a wide slat capacity with a single conveyor thereby reducing costs significantly.
This together with the extensive use of machined solid wearstrip material gives the SBF-P200 conveyor a strength and capacity significantly higher than other similar systems.
The conveyor has now been developed further to encompass new conveyor widths in addition to the standard 100mm.
New widths of 130mm, 170mm, 205mm and 320mm are now available.
These new conveyor designs increase the physical capacity able to be transported and also reduce the need for multi lane installations, giving a wide slat capacity with a single conveyor thereby reducing costs significantly.
Monday, November 27, 2006
Manual/CNC lathe has large 104mm spindle bore
The vital statistic of the new XYZ ProTURN SLX 555 manual/CNC lathe is its large 104mm spindle bore. This, combined with a 560 mm swing over bed and a choice of 1000mm, 1750mm or 3000mm between centres, guarantees maximum flexibility, whether machining one-off components or in small batch production mode. However, it is not just the physical dimensions and structural integrity of the ProTURN SLX 555 that prompts XYZ Machine Tools to describe its new lathe as ideal for such applications.
With just a few hours training even someone with little or no CNC experience will be confident of producing complex parts, because the unique 'traking' feature of the ProtoTRAK SLX control ensures that the operator is always in control.
This feature allows the operator to physically wind the hand wheel and so to move the machine through the program at a speed proportional to the speed at which the hand wheel is moving.
Stop or reverse the hand wheel and the machine will do the same.
This allows the operator to check the programmed toolpath before switching to computer control, thereby avoiding collisions and boosting operator confidence.
Standard machine equipment includes a 300mm diameter three-jaw chuck, Dickson quick change toolpost with six holders, air-assist 'floating' tailstock, interlocked chuck and swarf guards, and joystick control for rapid movement.
The ProtoTRAK SLX control contributes constant surface speed, tool tip radius compensation and a host of other features.
With just a few hours training even someone with little or no CNC experience will be confident of producing complex parts, because the unique 'traking' feature of the ProtoTRAK SLX control ensures that the operator is always in control.
This feature allows the operator to physically wind the hand wheel and so to move the machine through the program at a speed proportional to the speed at which the hand wheel is moving.
Stop or reverse the hand wheel and the machine will do the same.
This allows the operator to check the programmed toolpath before switching to computer control, thereby avoiding collisions and boosting operator confidence.
Standard machine equipment includes a 300mm diameter three-jaw chuck, Dickson quick change toolpost with six holders, air-assist 'floating' tailstock, interlocked chuck and swarf guards, and joystick control for rapid movement.
The ProtoTRAK SLX control contributes constant surface speed, tool tip radius compensation and a host of other features.
Sunday, November 26, 2006
Toolroom CNC lathe is powerful, flexible, simple
Toolroom Lathe has a proprietary conversational operating system that makes cutting parts and creating part programs nearly effortless, and operation ranges from manual to CNC.
With a functional range from manual turning to full CNC, the Haas TL-1 Toolroom Lathe features a proprietary conversational operating system that makes cutting parts and creating part programs nearly effortless. The operator chooses an operation, touches off the X and Z surfaces, and is then prompted to enter basic dimension information. Default values for feed per revolution, spindle speed and depth of cut are automatically entered by the control, but may be changed by the operator.
Once all necessary information is entered, a push of the Cycle Start button performs the desired operation.
A Recorder function allows information to be saved for future retrieval.
The TL-1 operates in four modes.
In all modes, the Haas control provides extremely accurate digital read-out (DRO) of position, displayed to 0.0005in when using the manual handwheels or to 0.0001in when using the electronic jog handle.
Electronic soft stops may be set to limit the travel of the lathe.
In manual mode, the X and Z axes are moved via standard handwheels.
In semi-automatic mode, the TL-1 performs simultaneous linear interpolation for both axes using a single handwheel.
ID/OD chamfers and tapers, for example, are easily cut in semi-automatic mode.
In automatic mode, built-in machining cycles (both single- and multi-pass) are available for rough and finish profiling, chamfering, grooving, parting off, threading, drilling and tapping.
In full CNC, the TL-1 is programmed using standard G code, and all axis motion is regulated by the Haas control via a G-code program.
Operations that would be difficult or impossible on a manual machine, such as radii, tapers, profiles, grooving, ID and OD threading, and rigid tapping, are all possible on the TL-1 - without knowledge of G-code programming.
Help menus are available directly on-screen, and a dry-run graphics feature allows operators to check their work before running a part.
MACH 2006 witnessed several new machines from Haas Automation, the largest CNC machine tool manufacturer in the world.
Haas demonstrated machines and metal cutting technology for aerospace, automotive, medical, mould and die and general machining industries.
More than 25 CNC technology products were on show demonstrate vertical and horizontal machining and turning applications.
With a functional range from manual turning to full CNC, the Haas TL-1 Toolroom Lathe features a proprietary conversational operating system that makes cutting parts and creating part programs nearly effortless. The operator chooses an operation, touches off the X and Z surfaces, and is then prompted to enter basic dimension information. Default values for feed per revolution, spindle speed and depth of cut are automatically entered by the control, but may be changed by the operator.
Once all necessary information is entered, a push of the Cycle Start button performs the desired operation.
A Recorder function allows information to be saved for future retrieval.
The TL-1 operates in four modes.
In all modes, the Haas control provides extremely accurate digital read-out (DRO) of position, displayed to 0.0005in when using the manual handwheels or to 0.0001in when using the electronic jog handle.
Electronic soft stops may be set to limit the travel of the lathe.
In manual mode, the X and Z axes are moved via standard handwheels.
In semi-automatic mode, the TL-1 performs simultaneous linear interpolation for both axes using a single handwheel.
ID/OD chamfers and tapers, for example, are easily cut in semi-automatic mode.
In automatic mode, built-in machining cycles (both single- and multi-pass) are available for rough and finish profiling, chamfering, grooving, parting off, threading, drilling and tapping.
In full CNC, the TL-1 is programmed using standard G code, and all axis motion is regulated by the Haas control via a G-code program.
Operations that would be difficult or impossible on a manual machine, such as radii, tapers, profiles, grooving, ID and OD threading, and rigid tapping, are all possible on the TL-1 - without knowledge of G-code programming.
Help menus are available directly on-screen, and a dry-run graphics feature allows operators to check their work before running a part.
MACH 2006 witnessed several new machines from Haas Automation, the largest CNC machine tool manufacturer in the world.
Haas demonstrated machines and metal cutting technology for aerospace, automotive, medical, mould and die and general machining industries.
More than 25 CNC technology products were on show demonstrate vertical and horizontal machining and turning applications.
Saturday, November 25, 2006
Budget-priced lathes and millers introduced
Manual machine tools remain a popular choice for training organisations and maintenance departments but price is always a constraining factor. With this in mind XYZ Machine Tools has added the budget priced e series of turret mills and lathes to its product portfolio. Sourced from China, prices start at GBP 4950 for the eMILL 2000 and the smallest of the three models of eTURN.
Despite their ultra low price tags, these machines are of solid ribbed cast iron construction and are fitted with European-sourced bearings and electrical components.
All have full CE approval and are backed by a UK company that has become synonymous with quality, reliability and value for money.
Standard on the 3HP eMILL 2000 is a dual speed range 60-4200 rev/min spindle, power feed to the 1270mm by 254mm table and two-axis digital readout.
Options include a 5000 rev/min inverter driven spindle, power feed to the cross slide and 3- or 4-axis digital readout.
The three models in the eTURN range - 1430, 2060 and 2680 - offer spindle speed ranges from 45-1800 rev/min to 26-2000 rev/min, a swing over the bed from 356mm to 660mm and a between centres distance from 750mm to 2000mm
Despite their ultra low price tags, these machines are of solid ribbed cast iron construction and are fitted with European-sourced bearings and electrical components.
All have full CE approval and are backed by a UK company that has become synonymous with quality, reliability and value for money.
Standard on the 3HP eMILL 2000 is a dual speed range 60-4200 rev/min spindle, power feed to the 1270mm by 254mm table and two-axis digital readout.
Options include a 5000 rev/min inverter driven spindle, power feed to the cross slide and 3- or 4-axis digital readout.
The three models in the eTURN range - 1430, 2060 and 2680 - offer spindle speed ranges from 45-1800 rev/min to 26-2000 rev/min, a swing over the bed from 356mm to 660mm and a between centres distance from 750mm to 2000mm
Friday, November 24, 2006
Precision CNC toolroom lathe works manually too
As technology advances toward miniaturization, machines and machine components get smaller and more efficient. Many shops are purchasing smaller-size lathes to produce these parts. Haas Automation's new compact HHLV-1 precision toolroom lathe is a perfect choice for producing high-quality small- to medium-sized parts without the expense of purchasing a larger machine.
The new HHLV-1 is a hybrid precision toolroom lathe that has a full CNC control, but can also be operated manually.
The distance between centers is 18in, and the cross-slide travel is 8in.
The machine has a part swing of 14in over the guide rail, with 6in over the cross slide.
For versatility, spindle speeds are infinitely variable from 0-3,000 rev/min, and the 5C collet nose accepts a variety of workholding options.
The HHLV-1 has a compact 77' x 32.5in footprint that occupies very little floor space, and the machine is slim enough to fit through a standard 36in doorway.
Haas Automation designed the HHLV-1 to be easy to use and efficient.
A No 3 Morse-taper tailstock and 10-gallon coolant tank are standard equipment.
The heavy steel base includes a utility cabinet with a built-in tooling rack, utility shelf and plenty of room for storage.
The cabinet also allows easy access to the coolant tank.
Options for the HHLV-1 include 4in and 5in 3-jaw chucks, a cam-lock tool post for 1/2in tooling, a steady rest and an 8-station automatic tool turret.
The famous Haas CNC control makes the HHLV-1 easy to program and operate, even for beginners.
Its bright, color LCD display and thoughtful keyboard layout make it a pleasure to use.
The machine comes standard with the Haas Intuitive Programming System, a conversational operating system that guides the operator through basic CNC operations - from initial set up to pressing the Cycle Start button.
You don't have to know G-code to cut make parts, and that makes it one of the most user-friendly CNC controls in the industry.
In manual mode, the standard handwheels and precise digital readout ensure high accuracy and ease of operation.
Manual machinists will be making parts almost immediately.
The tough HHLV-1 is a small, high-precision CNC lathe that incorporates the design philosophy and high quality that make Haas the largest machine-tool manufacturer in North America.
And because it's built in the USA by Haas, it's backed by the worldwide Haas Factory Outlet network of support and service.
* Haas Automation at IMTS 2006, Chicago, USA, September 6-13, South Hall, Booth A8000.
The new HHLV-1 is a hybrid precision toolroom lathe that has a full CNC control, but can also be operated manually.
The distance between centers is 18in, and the cross-slide travel is 8in.
The machine has a part swing of 14in over the guide rail, with 6in over the cross slide.
For versatility, spindle speeds are infinitely variable from 0-3,000 rev/min, and the 5C collet nose accepts a variety of workholding options.
The HHLV-1 has a compact 77' x 32.5in footprint that occupies very little floor space, and the machine is slim enough to fit through a standard 36in doorway.
Haas Automation designed the HHLV-1 to be easy to use and efficient.
A No 3 Morse-taper tailstock and 10-gallon coolant tank are standard equipment.
The heavy steel base includes a utility cabinet with a built-in tooling rack, utility shelf and plenty of room for storage.
The cabinet also allows easy access to the coolant tank.
Options for the HHLV-1 include 4in and 5in 3-jaw chucks, a cam-lock tool post for 1/2in tooling, a steady rest and an 8-station automatic tool turret.
The famous Haas CNC control makes the HHLV-1 easy to program and operate, even for beginners.
Its bright, color LCD display and thoughtful keyboard layout make it a pleasure to use.
The machine comes standard with the Haas Intuitive Programming System, a conversational operating system that guides the operator through basic CNC operations - from initial set up to pressing the Cycle Start button.
You don't have to know G-code to cut make parts, and that makes it one of the most user-friendly CNC controls in the industry.
In manual mode, the standard handwheels and precise digital readout ensure high accuracy and ease of operation.
Manual machinists will be making parts almost immediately.
The tough HHLV-1 is a small, high-precision CNC lathe that incorporates the design philosophy and high quality that make Haas the largest machine-tool manufacturer in North America.
And because it's built in the USA by Haas, it's backed by the worldwide Haas Factory Outlet network of support and service.
* Haas Automation at IMTS 2006, Chicago, USA, September 6-13, South Hall, Booth A8000.
Thursday, November 23, 2006
Instrument makers' lathe has sensitive feed
A compact clock, watch and instrument makers lathe accepting the 8mm horological collets in both headstock and tailstock spindles. Constructed from cast iron and steel, individually built and issued with an Engineers Test Certificate, the 90 CW is mounted on a cast aluminium base with integral thyristor speed control and is a portable unit. * Lathe bed - a one piece massive iron casting of cantilever form ground on all faces.
The bed has a central tee slot providing a positive and accurate location for the tailstock, incorporating a gap permitting the accommodation of large diameter clock wheels, total swing is 120mm (4.7in), the bed is in dovetail form.
* Saddle and slides - the cast iron saddle can be rapidly or sensitively traversed via the saddle lever feed (a leadscrew can be fitted if preferred).
A long tee slotted steel crosslide permits the mounting of accessories such as the Jacot (RG59) unit or Roller (RG53) filing rest, for example.
The crosslide has an etched angular scale 45-0-45 deg and carries the swivelling topslide to permit taper turning.
A quick change height adjustable tool holder is fitted.
All slides are fitted with full length adjustable gib strips.
Handwheels are steel and incorporate laser etched, re-set to zero calibration dials, clearly marked and graduated in 0.025mm increments.
* Tailstock - the tailstock is cast iron, bored and honed to accommodate the hardened ground steel barrel.
The barrel accepts the 8mm horological collet, which is secured in the conventional manner with a draw-in bar.
The barrel is lever fed to facilitate high sensitivity drilling.
Locking handles are fitted to both body and barrel.
The tailstock may be off-set for the turning of long and shallow tapers.
The bed has a central tee slot providing a positive and accurate location for the tailstock, incorporating a gap permitting the accommodation of large diameter clock wheels, total swing is 120mm (4.7in), the bed is in dovetail form.
* Saddle and slides - the cast iron saddle can be rapidly or sensitively traversed via the saddle lever feed (a leadscrew can be fitted if preferred).
A long tee slotted steel crosslide permits the mounting of accessories such as the Jacot (RG59) unit or Roller (RG53) filing rest, for example.
The crosslide has an etched angular scale 45-0-45 deg and carries the swivelling topslide to permit taper turning.
A quick change height adjustable tool holder is fitted.
All slides are fitted with full length adjustable gib strips.
Handwheels are steel and incorporate laser etched, re-set to zero calibration dials, clearly marked and graduated in 0.025mm increments.
* Tailstock - the tailstock is cast iron, bored and honed to accommodate the hardened ground steel barrel.
The barrel accepts the 8mm horological collet, which is secured in the conventional manner with a draw-in bar.
The barrel is lever fed to facilitate high sensitivity drilling.
Locking handles are fitted to both body and barrel.
The tailstock may be off-set for the turning of long and shallow tapers.
Wednesday, November 22, 2006
Turning can be manual, electronic or CNC
Combination' or 'half-NC' lathes combine conventional turning, electronic cycle turning and full CNC turning in one machine and the user needs no CNC training to use electronic turning cycles.
Centre lathe turning has progressed at an impressive rate since the conception of electronics, driving axis and spindles, and computer driven programming. The Ajax Evolution range of machines, combines all the virtues of conventional turning, electronic cycle turning and full CNC turning all in one machine. The Ajax Evolution machines can be used as a manual lathe by using the electronic handwheels and axis joy stick, the control is used as a simple DRO measuring system.
For the 'one-offs' and small batch production the Ajax Evolution can be programmed, using the flexible electronic turning cycles, its quick, its convenient and you do not have to be CNC trained to use the electronic cycles.
You can produce tapers, radii, grooving, multi point profiles and screwcutting by answering simple questions direct from the Fanuc screen.
These electronic cycles can then be linked together to give a complete electronic programme.
For complicated shapes and batch production, full ISO programming on the Fanuc Oi Turn Mate control is possible.
The Ajax Evolution machines include fully enclosed guarding, meeting CE regulations, automatic four-way indexing toolpost, automatic speed range change and new Fanuc touch screen control and monitor on sliding pendant.
Machine programs can be up and downloaded through the RS232 port or saved directly to the PMCIA card.
The range starts at 165mm centre height to 325mm centre height, with bed lengths varying from 750mm to 5000mm, spindle speeds vary for sizes of machines but all have CSS fitted as standard.
Centre lathe turning has progressed at an impressive rate since the conception of electronics, driving axis and spindles, and computer driven programming. The Ajax Evolution range of machines, combines all the virtues of conventional turning, electronic cycle turning and full CNC turning all in one machine. The Ajax Evolution machines can be used as a manual lathe by using the electronic handwheels and axis joy stick, the control is used as a simple DRO measuring system.
For the 'one-offs' and small batch production the Ajax Evolution can be programmed, using the flexible electronic turning cycles, its quick, its convenient and you do not have to be CNC trained to use the electronic cycles.
You can produce tapers, radii, grooving, multi point profiles and screwcutting by answering simple questions direct from the Fanuc screen.
These electronic cycles can then be linked together to give a complete electronic programme.
For complicated shapes and batch production, full ISO programming on the Fanuc Oi Turn Mate control is possible.
The Ajax Evolution machines include fully enclosed guarding, meeting CE regulations, automatic four-way indexing toolpost, automatic speed range change and new Fanuc touch screen control and monitor on sliding pendant.
Machine programs can be up and downloaded through the RS232 port or saved directly to the PMCIA card.
The range starts at 165mm centre height to 325mm centre height, with bed lengths varying from 750mm to 5000mm, spindle speeds vary for sizes of machines but all have CSS fitted as standard.
Tuesday, November 21, 2006
Operations software boosts manual/CNC lathe usage
'Operations Link' software offers operators of manual/CNC 'combination' lathes further important advantages in time-saving, automatic linking of operating cycles and workshop efficiency.
British lathe specialist T S Harrison has significantly enhanced its successful Alpha XT Manual/CNC lathe range with the introduction of 'Operations Link' software, which now offers operators further important advantages in time-saving, automatic linking of operating cycles and workshop efficiency. Technical designers at Harrison, part of the internationally-renowned 600 Group machine tools company based at Heckmondwike, West Yorkshire, have worked closely with the market-leading control systems provider, G E Fanuc, to develop this new software. 'Operations Link' will be incorporated on all newly-supplied Alpha XT machines.
It is also being offered to existing Harrison XT customers free of charge as an easily-installed update.
The four-version Alpha XT range (XT 1350, XT 1400, XT 1460 and XT 1550), is equipped with Fanuc's latest Oi TC Mate control which enables no fewer than 40 advanced, individual machining cycles to be programmed and stored, using the system's Fanuc TurnMate i conversational shop floor programming.
Now, thanks to the launch of 'Operations Link' these cycles can be linked together to create a fully-automatic and continuous machining sequence from start to end, without the need for the lathe operator to tend the machine or switch between cycles.
Philip Stockdale, technical support engineer at T S Harrison, said: 'The early versions of the Alpha XT required the operator to complete each operation and then move from one cycle to the next.
For example you might want to create cycles for a facing operation, followed by a rough and finish turning cycle, and then a threading cycle.' He said: 'Fanuc and Harrison engineers have created the ability to link together these separate operations to produce a complete program, which operates the whole sequence completely automatically with just one press of a button which makes it more like a CNC machine.' The second major benefit of 'Operations Link' is that multi-cycle programs can be transferred via a memory card and stored on a PC for future use - or, crucially, for off-line programming/simulation of complex parts and safety-checking prior to machining.
Furthermore, up to five of these complete programs can be stored on the Alpha XT's Oi Mate control itself, for maximum operating flexibility.
Stockdale explained: 'For small to medium numbers of turned components, the new software speeds up the all-important 'floor-to-floor' time, especially when the Alpha XT lathes are used with the multi-station tool turret.
For these types of turning operations, the quicker and easier it is to complete the machining, the better and more cost-effective it becomes for the toolroom.' He added: 'There are also important benefits in programming time, because large numbers of complete turning programs can be stored.
Operators can create a directory of complete programs on their PCs, which can be downloaded onto the lathe again and again.' As well as Fanuc TurnMate i conversational programming, the advanced Alpha XT lathe range features the ability to switch to full ISO (CNC) functionality.
All Alpha XT customers also receive Harrison's 'Alphalink' CAD/CAM software which is a fully Windows-compatible system for flexible off-line programming.
Harrison is the only lathe manufacturer to provide CAD/CAM free of charge to all customers.
British lathe specialist T S Harrison has significantly enhanced its successful Alpha XT Manual/CNC lathe range with the introduction of 'Operations Link' software, which now offers operators further important advantages in time-saving, automatic linking of operating cycles and workshop efficiency. Technical designers at Harrison, part of the internationally-renowned 600 Group machine tools company based at Heckmondwike, West Yorkshire, have worked closely with the market-leading control systems provider, G E Fanuc, to develop this new software. 'Operations Link' will be incorporated on all newly-supplied Alpha XT machines.
It is also being offered to existing Harrison XT customers free of charge as an easily-installed update.
The four-version Alpha XT range (XT 1350, XT 1400, XT 1460 and XT 1550), is equipped with Fanuc's latest Oi TC Mate control which enables no fewer than 40 advanced, individual machining cycles to be programmed and stored, using the system's Fanuc TurnMate i conversational shop floor programming.
Now, thanks to the launch of 'Operations Link' these cycles can be linked together to create a fully-automatic and continuous machining sequence from start to end, without the need for the lathe operator to tend the machine or switch between cycles.
Philip Stockdale, technical support engineer at T S Harrison, said: 'The early versions of the Alpha XT required the operator to complete each operation and then move from one cycle to the next.
For example you might want to create cycles for a facing operation, followed by a rough and finish turning cycle, and then a threading cycle.' He said: 'Fanuc and Harrison engineers have created the ability to link together these separate operations to produce a complete program, which operates the whole sequence completely automatically with just one press of a button which makes it more like a CNC machine.' The second major benefit of 'Operations Link' is that multi-cycle programs can be transferred via a memory card and stored on a PC for future use - or, crucially, for off-line programming/simulation of complex parts and safety-checking prior to machining.
Furthermore, up to five of these complete programs can be stored on the Alpha XT's Oi Mate control itself, for maximum operating flexibility.
Stockdale explained: 'For small to medium numbers of turned components, the new software speeds up the all-important 'floor-to-floor' time, especially when the Alpha XT lathes are used with the multi-station tool turret.
For these types of turning operations, the quicker and easier it is to complete the machining, the better and more cost-effective it becomes for the toolroom.' He added: 'There are also important benefits in programming time, because large numbers of complete turning programs can be stored.
Operators can create a directory of complete programs on their PCs, which can be downloaded onto the lathe again and again.' As well as Fanuc TurnMate i conversational programming, the advanced Alpha XT lathe range features the ability to switch to full ISO (CNC) functionality.
All Alpha XT customers also receive Harrison's 'Alphalink' CAD/CAM software which is a fully Windows-compatible system for flexible off-line programming.
Harrison is the only lathe manufacturer to provide CAD/CAM free of charge to all customers.
Monday, November 20, 2006
Mill-turn centre has rapid-motion feeds
Mill-turn centre has very stiff Y-axis A high-performance mill-turn centre features an extremely stiff Y-axis featuring wide-set guide rails and also very fast rapid-motion speeds.
Fitted with a counter spindle, driven tools, a high-precision C-axis and very fast rapid-motion speeds, the Maxxturn 45 offers everything the customer needs to manufacture complex turned and milled parts, not only in high quality, but also cost effective. A very special highlight of the new Maxxturn 45 is the Y-axis. It has been integrated into the machine structure and stands on extremely wide-set guide rails.
This ensures extreme stiffness and top precision, even when performing difficult cutting tasks.
Additionally, the machine has a very large travel, which also increases the number of machining options when turning and milling.
The Maxxturn 45 is available with either a Siemens or Fanuc control unit - SHOPTURN or Manual Guide are standard equipment.
* Tailored automation - as with all Emco machines, there are of course perfectly customised automation fittings for the Maxxturn 45 too.
There is a Swing Loader for automatic loading and feeding out.
For bar work, there are three different bar loaders on offer: a classical 3m loader, the Emco short-bar loader LM800 for limited floor space and the CompactLoad E45.
The latter is on offer in a package with the Maxxturn 45 at an unbeatable discount price.
Machine details include the following.
* Maximum bar diameter - 45mm.
* Maximum part length - 480mm.
* Maximum part diameter - 300mm.
* Travel in X/Z/Y - 160/510/ +40/-30mm.
* Maximum lining diameter HS/GS - 200/130mm.
Fitted with a counter spindle, driven tools, a high-precision C-axis and very fast rapid-motion speeds, the Maxxturn 45 offers everything the customer needs to manufacture complex turned and milled parts, not only in high quality, but also cost effective. A very special highlight of the new Maxxturn 45 is the Y-axis. It has been integrated into the machine structure and stands on extremely wide-set guide rails.
This ensures extreme stiffness and top precision, even when performing difficult cutting tasks.
Additionally, the machine has a very large travel, which also increases the number of machining options when turning and milling.
The Maxxturn 45 is available with either a Siemens or Fanuc control unit - SHOPTURN or Manual Guide are standard equipment.
* Tailored automation - as with all Emco machines, there are of course perfectly customised automation fittings for the Maxxturn 45 too.
There is a Swing Loader for automatic loading and feeding out.
For bar work, there are three different bar loaders on offer: a classical 3m loader, the Emco short-bar loader LM800 for limited floor space and the CompactLoad E45.
The latter is on offer in a package with the Maxxturn 45 at an unbeatable discount price.
Machine details include the following.
* Maximum bar diameter - 45mm.
* Maximum part length - 480mm.
* Maximum part diameter - 300mm.
* Travel in X/Z/Y - 160/510/ +40/-30mm.
* Maximum lining diameter HS/GS - 200/130mm.
Sunday, November 19, 2006
Vibratory feeder for fragile sintered 'e' cores
Elscint Automation has developed a unique Vibratory bowl feeder for feeding of Sintered 'E' Cores. Mr Monish Shete, Director of Elscint Automation informs that these 'E' Cores are fragile and a fall from the top of the Bowl can break them. Therefore, he states that Elscint Automation uses a special type of Elscinthane PU Lining with extra thickness.
He further explains that the Bowl is designed in such a manner that the possibility of a fall is reduced if not eliminated.
If the components do fall during orientation, the fall is contained by specially designed flaps.
The total system consists of an Elscint Conveyor Feeder ahead of the Vibratory Bowl Feeder on which the 'E' Cores are passed and while they pass, the top portion is printed with a printing head.
This system works at 100 Pieces per minute and has resulted in completion of printing jobs at the customers end in just 4 hours which uptill now used to take more than 12 hours manually.
These and other innovative application ideas are possible by interacting with the qualified Application Engineers from Elscint Automation, who are more than eager to help you in your feeding requirements.
He further explains that the Bowl is designed in such a manner that the possibility of a fall is reduced if not eliminated.
If the components do fall during orientation, the fall is contained by specially designed flaps.
The total system consists of an Elscint Conveyor Feeder ahead of the Vibratory Bowl Feeder on which the 'E' Cores are passed and while they pass, the top portion is printed with a printing head.
This system works at 100 Pieces per minute and has resulted in completion of printing jobs at the customers end in just 4 hours which uptill now used to take more than 12 hours manually.
These and other innovative application ideas are possible by interacting with the qualified Application Engineers from Elscint Automation, who are more than eager to help you in your feeding requirements.
Saturday, November 18, 2006
'Ageism' does not enter CNC equation at Hone-All
Age doesn't enter into the equation at this honingsub-contractor, whose senior machinist quickly took control ofnew CNC machine tools, acquired to expand machining capabilities.Age doesn't enter into the equation at sub-contractorHone-All Precision. Enthusiasm and commitment are the qualitiesthis precision machining specialist looks for when recruiting,and machinist Roger Ayers, while cheerfully admitting to beingeligible for his bus pass, fits the bill precisely. He joined theDunstable-based company a year or so ago as a highly skilledmiller whose 45 years' experience had been gained on manualmachines.
Since then, encouraged by managing director ColinRodney and co-director Andrea Rodney, he has progressed to CNC,and has also added turning to his skills set.
It's part ofwhat the two directors describe as a multi-skilled approach tothe business of providing a single source capability.
Althoughwell known for its honing, deep hole drilling and boringexpertise, the past two to three years have seen Hone-AllPrecision expand its machining and project management capability.The result is an ISO 9001-2000 accredited business capable ofmachining components in virtually any material up to three metresin length to the highest quality standards and within onefacility.
Part of the GBP 0.5 million investment to date has beenin two new machines from XYZ Machine Tools.
These are a3HP/2.25kW Edge 2000 manual/CNC mill equipped with the innovativePrototrak control and a centre lathe equipped with a Newall C70digital readout, both of which Roger Ayers uses for intricateprototype work.
The turret mill has a table work surface of1270mm by 254mm and X, Y and Z travels of 762mm, 406mm and 406mmrespectively, while the 7.5HP/5.6kW XYZ 1550 lathe provides a390mm swing over the bed and 1250mm between centres.
ThePrototrak control's question and answer format has provedparticularly helpful, because it has enabled skilled machinistssuch as Ayers as well as younger trainees to adapt quickly toCNC, with both machines playing their part in Hone-AllPrecision's continuous improvement programme.
'Beforewe bought the XYZ mill some nine months ago we were doingone-offs on our machining centre and holding up production workas a result,' says Andrea Rodney.
'So we began lookingfor a machine that would be easy to set-up and operate, but onethat could also be used in our in-house training programme.
Wehad good reports about these machines from customers and have notbeen disappointed.
We freed up the machining centre and havesince taken on more prototype work because we can turn the workround more quickly.
Much the same has happened with the newlathe: as well as one-offs it does all the preparation work forthe smaller gundrills, freeing up much-needed capacity.
Since then, encouraged by managing director ColinRodney and co-director Andrea Rodney, he has progressed to CNC,and has also added turning to his skills set.
It's part ofwhat the two directors describe as a multi-skilled approach tothe business of providing a single source capability.
Althoughwell known for its honing, deep hole drilling and boringexpertise, the past two to three years have seen Hone-AllPrecision expand its machining and project management capability.The result is an ISO 9001-2000 accredited business capable ofmachining components in virtually any material up to three metresin length to the highest quality standards and within onefacility.
Part of the GBP 0.5 million investment to date has beenin two new machines from XYZ Machine Tools.
These are a3HP/2.25kW Edge 2000 manual/CNC mill equipped with the innovativePrototrak control and a centre lathe equipped with a Newall C70digital readout, both of which Roger Ayers uses for intricateprototype work.
The turret mill has a table work surface of1270mm by 254mm and X, Y and Z travels of 762mm, 406mm and 406mmrespectively, while the 7.5HP/5.6kW XYZ 1550 lathe provides a390mm swing over the bed and 1250mm between centres.
ThePrototrak control's question and answer format has provedparticularly helpful, because it has enabled skilled machinistssuch as Ayers as well as younger trainees to adapt quickly toCNC, with both machines playing their part in Hone-AllPrecision's continuous improvement programme.
'Beforewe bought the XYZ mill some nine months ago we were doingone-offs on our machining centre and holding up production workas a result,' says Andrea Rodney.
'So we began lookingfor a machine that would be easy to set-up and operate, but onethat could also be used in our in-house training programme.
Wehad good reports about these machines from customers and have notbeen disappointed.
We freed up the machining centre and havesince taken on more prototype work because we can turn the workround more quickly.
Much the same has happened with the newlathe: as well as one-offs it does all the preparation work forthe smaller gundrills, freeing up much-needed capacity.
Friday, November 17, 2006
True global subcontracting business is aim
BTMA member Rodmatic of Reading is setting a course few competitors will follow with the objective of being a true global subcontracting business.
By combining the expertise developed over some 40 years of high volume subcontract machining with a strong IT led strategy for smaller batchwork involving highly complex multi-feature components where a 'one-hit' single cycle operation will prevail, BTMA member Rodmatic of Reading is setting a course few competitors will follow with the objective of being a true global subcontracting business. Says director Brian Steatham, fresh from selling his highly successful software business Pathtrace to Planit Holdings at the turn of the year: 'I want to invest in this business and draw on my experiences from taking Pathtrace into international markets.' During his time at the head of the programming software company he successfully launched the business into America, Japan, Singapore, China and Brazil. Brian Steatham's vision is to structure the investment led company, already having a turnover of GBP 5 million and employing 55 people, into one providing a machining service that is very competitive, efficient on delivery and high on quality to support sectors such as oil and gas, fluid power, medical and specialist automotive with companies that operate in the global market.
The company, under managing director Robert Rickman, is already operating as two divisions, Rodmatic Multico for high volume production and Rodmatic Hytec as a fast response, single cycle, specialist production operation for higher value and complex parts in batch sizes between 20 and 500.
While both divisions are being organised with a view to being IT driven, they will use the latest business and communication systems and software, the most appropriate machine tools and quality equipment and this is to be progressively installed.
Adds Brian Steatham: 'We are not afraid to invest to achieve our targets.' Already at the Reading facilities a new Daewoo Puma MX 2000 ST turn/mill centre has been installed alongside an Hitachi Seiki HiTec-Turn 20 mill centre and a Mitutoyo Crysta Apex C co-ordinate measuring machine sited in its own temperature controlled inspection centre.
As would be expected from the founder of Pathtrace, EdgeCAM off line programming is being utilised to take in CAD models for four-axis contouring and five-axis positioning to present the tooling appropriately for compound angle feature machining.
Rodmatic Hytec is also providing a design support service where consultation for cost-effective machining is given taking in the extensive and traditional skills available from Rodmatic Multico's volume manufacture expertise as well as 'single cycle' technology.
And as part of the service available, in addition to Kanban or direct to line, both Rodmatic operations will provide packaging and delivery to customer specification.
Typical of the projects undertaken at Rodmatic Hytec is a family of shuttle valve bodies produced in batches of between 25 and 50 parts directly from a 200 mm sawn billet in a single operation.
The components involve considerably more milling and drilling than turning with more than 30 different holes, some set at compound angles with various critical intersections and breakthroughs to other holes and features.
Further operations also include turning, extensive milling, boring and threading carried out on the Puma MX 2000 ST utilising both main and subspindle, B-axis and five-axis positioning.
Altogether some 40 tools are used with the support of sister tool replacement for extended running to produce the part in a single cycle.
Previous suppliers machined the valve body from castings requiring numerous operations and relocations all accumulating to extended lead times with greater possibility of reject work.
Indeed, with Rodmatic Hytec's method development, any porosity problems often found by the customer on testing are a thing of the past and with a massive lead time reduction, it can almost instantly reset the machine to produce the next customer delivery.
The shuttle valve family was programmed using EdgeCAM Part Modeller and EdgeCAM Solid Machinist which, according to production manager Jonathan Imm, allowed holes and features to be easily repositioned or resized to accommodate the 'family' differences.
By combining the expertise developed over some 40 years of high volume subcontract machining with a strong IT led strategy for smaller batchwork involving highly complex multi-feature components where a 'one-hit' single cycle operation will prevail, BTMA member Rodmatic of Reading is setting a course few competitors will follow with the objective of being a true global subcontracting business. Says director Brian Steatham, fresh from selling his highly successful software business Pathtrace to Planit Holdings at the turn of the year: 'I want to invest in this business and draw on my experiences from taking Pathtrace into international markets.' During his time at the head of the programming software company he successfully launched the business into America, Japan, Singapore, China and Brazil. Brian Steatham's vision is to structure the investment led company, already having a turnover of GBP 5 million and employing 55 people, into one providing a machining service that is very competitive, efficient on delivery and high on quality to support sectors such as oil and gas, fluid power, medical and specialist automotive with companies that operate in the global market.
The company, under managing director Robert Rickman, is already operating as two divisions, Rodmatic Multico for high volume production and Rodmatic Hytec as a fast response, single cycle, specialist production operation for higher value and complex parts in batch sizes between 20 and 500.
While both divisions are being organised with a view to being IT driven, they will use the latest business and communication systems and software, the most appropriate machine tools and quality equipment and this is to be progressively installed.
Adds Brian Steatham: 'We are not afraid to invest to achieve our targets.' Already at the Reading facilities a new Daewoo Puma MX 2000 ST turn/mill centre has been installed alongside an Hitachi Seiki HiTec-Turn 20 mill centre and a Mitutoyo Crysta Apex C co-ordinate measuring machine sited in its own temperature controlled inspection centre.
As would be expected from the founder of Pathtrace, EdgeCAM off line programming is being utilised to take in CAD models for four-axis contouring and five-axis positioning to present the tooling appropriately for compound angle feature machining.
Rodmatic Hytec is also providing a design support service where consultation for cost-effective machining is given taking in the extensive and traditional skills available from Rodmatic Multico's volume manufacture expertise as well as 'single cycle' technology.
And as part of the service available, in addition to Kanban or direct to line, both Rodmatic operations will provide packaging and delivery to customer specification.
Typical of the projects undertaken at Rodmatic Hytec is a family of shuttle valve bodies produced in batches of between 25 and 50 parts directly from a 200 mm sawn billet in a single operation.
The components involve considerably more milling and drilling than turning with more than 30 different holes, some set at compound angles with various critical intersections and breakthroughs to other holes and features.
Further operations also include turning, extensive milling, boring and threading carried out on the Puma MX 2000 ST utilising both main and subspindle, B-axis and five-axis positioning.
Altogether some 40 tools are used with the support of sister tool replacement for extended running to produce the part in a single cycle.
Previous suppliers machined the valve body from castings requiring numerous operations and relocations all accumulating to extended lead times with greater possibility of reject work.
Indeed, with Rodmatic Hytec's method development, any porosity problems often found by the customer on testing are a thing of the past and with a massive lead time reduction, it can almost instantly reset the machine to produce the next customer delivery.
The shuttle valve family was programmed using EdgeCAM Part Modeller and EdgeCAM Solid Machinist which, according to production manager Jonathan Imm, allowed holes and features to be easily repositioned or resized to accommodate the 'family' differences.
Thursday, November 16, 2006
Management expertise to support global operations
Managing director Robert Rickman of Rodmatic based in Reading has appointed Terry O'Sullivan as Works Manager to enhance the subcontract machining operations and introduce new ideas to improve productivity. Through his extensive expertise in volume production for Tier 1 automotive industry suppliers and short batch machining for OEMs in the mechanical handling sector, Terry O'Sullivan will directly control production at Rodmatic Multico which bases its high volume machining capability on 37 multi-automatic lathes as well as the small to medium batch, high technology mill/turn operation of Rodmatic Hytek. Terry O'Sullivan has extensive experience in supply-chain management and implementing lean manufacturing technology that he has built-up over 25 years.
He has a track record of justification, installation and commissioning flexible manufacturing technology, material handling, implementing MRP systems and has extensive assembly line experience.
He has also been heavily involved with many aspects of new product introduction.
Adds Robert Rickman: 'Terry has worked on a wide range of projects including the high profile Thrust SSC where he was involved in the supply of special equipment used in the breaking of the land speed record.
From his apprenticeship he has been heavily involved in production engineering and most aspects of production management.
With this level of considerable hands-on expertise, he will be a key player to help improve our competitiveness in support of our expansion as a global business.'
He has a track record of justification, installation and commissioning flexible manufacturing technology, material handling, implementing MRP systems and has extensive assembly line experience.
He has also been heavily involved with many aspects of new product introduction.
Adds Robert Rickman: 'Terry has worked on a wide range of projects including the high profile Thrust SSC where he was involved in the supply of special equipment used in the breaking of the land speed record.
From his apprenticeship he has been heavily involved in production engineering and most aspects of production management.
With this level of considerable hands-on expertise, he will be a key player to help improve our competitiveness in support of our expansion as a global business.'
Wednesday, November 15, 2006
Silver celebrations for engineering subcontractor
A Staffordshire engineering firm is to celebrate its 25th anniversary in style - with a birthday bash for its employees and customers.
Staffordshire Precision Engineering is holding the event, at the Manor House Hotel in Alsager on November 10th, to thank people for their support and hard work over the past quarter of a century. Joint MD Phil Smith said: 'We've come a long way since my dad founded the company in 1981.
'He started the company from scratch to provide the facility of a local jobbing shop for larger manufacturers in the area.
'Over the years we have specialised into manufacturing small to medium volumes of high precision components.
We now have 36 employees and a turnover of over GBP2m.
'It's taken a lot of hard work and we couldn't have done it without the support of our customers, suppliers and most importantly, our workforce.
'This event is to thank all of them, celebrate our first 25 years and look forward to the next 25.' The firm, which is based in Newcastle-under-Lyme, manufactures specialist components for various industries including the aerospace, scientific instruments and the automotive sector.
Staffordshire Precision Engineering is holding the event, at the Manor House Hotel in Alsager on November 10th, to thank people for their support and hard work over the past quarter of a century. Joint MD Phil Smith said: 'We've come a long way since my dad founded the company in 1981.
'He started the company from scratch to provide the facility of a local jobbing shop for larger manufacturers in the area.
'Over the years we have specialised into manufacturing small to medium volumes of high precision components.
We now have 36 employees and a turnover of over GBP2m.
'It's taken a lot of hard work and we couldn't have done it without the support of our customers, suppliers and most importantly, our workforce.
'This event is to thank all of them, celebrate our first 25 years and look forward to the next 25.' The firm, which is based in Newcastle-under-Lyme, manufactures specialist components for various industries including the aerospace, scientific instruments and the automotive sector.
Tuesday, November 14, 2006
Subcontractor technical manager gets 25 years
Technical manager Richard Simmons is celebrating 25 years' service with APT Leicester - leading supplier of high precision turned components and intricate prismatic parts.
Technical manager Richard Simmons is celebrating 25 years' service with APT Leicester - leading supplier of high precision turned components and intricate prismatic parts. When he joined back in 1981, the company had just one CNC machine together with around 40 bar fed mechanical cam auto lathes, and much of its business came from providing machine parts for the hosiery industry. Appointed as works manager with the responsibility for setting up auto lathes and CNC sliding head lathes, Simmons was promoted to technical manager earlier this year and now also has responsibility for maintaining machinery and the IT network.
When he joined the company, just one computer was on site running an accounts package.
There are now 10 PCs in place and a variety of software applications.
'There have been quite a few changes since I joined APT,' explains Simmons.
'The company focuses increasingly on more difficult, high value jobs, machining close tolerance complex parts in a range of materials including aluminium, brass, steel, plastics, stainless and high temperature alloys.' Today, APT's 16 lathes and two machining centres are all CNC, while a significant proportion of customers now come from higher value sectors such as aerospace, automotive, lock making and instrumentation.
Born and educated in Whetstone, Leicester, Simmons qualified as a metallurgist while a trainee at TI Desford Tubes.
After five years with the company he left to run the machine shop for an electroforming/machining specialist for the following 12 years before joining APT.
Technical manager Richard Simmons is celebrating 25 years' service with APT Leicester - leading supplier of high precision turned components and intricate prismatic parts. When he joined back in 1981, the company had just one CNC machine together with around 40 bar fed mechanical cam auto lathes, and much of its business came from providing machine parts for the hosiery industry. Appointed as works manager with the responsibility for setting up auto lathes and CNC sliding head lathes, Simmons was promoted to technical manager earlier this year and now also has responsibility for maintaining machinery and the IT network.
When he joined the company, just one computer was on site running an accounts package.
There are now 10 PCs in place and a variety of software applications.
'There have been quite a few changes since I joined APT,' explains Simmons.
'The company focuses increasingly on more difficult, high value jobs, machining close tolerance complex parts in a range of materials including aluminium, brass, steel, plastics, stainless and high temperature alloys.' Today, APT's 16 lathes and two machining centres are all CNC, while a significant proportion of customers now come from higher value sectors such as aerospace, automotive, lock making and instrumentation.
Born and educated in Whetstone, Leicester, Simmons qualified as a metallurgist while a trainee at TI Desford Tubes.
After five years with the company he left to run the machine shop for an electroforming/machining specialist for the following 12 years before joining APT.
Sunday, November 12, 2006
CNC millers extend manufacturing experience
More CNC machine tools have been added to a Faculty of Enginering that uses industry-standard CAD/CAM software so that students experience the complete design to manufacture cycle.
Whatever the individual's background, interests or ability,Coleg Menai reckons to have something to offer on its threecampuses situated in the university city of Bangor and the Isleof Anglesey, North Wales. A wide range of vocational and academiccourses ensures that the college's intake continues toincrease year on year, with over 10,000 students currentlystudying full- or part-time at the College, at home and on-line.The campus at Ffordd Ffriddoedd houses the Faculty of Technology,which has more than 500 students each year signing up toengineering courses ranging from NVQ Level One to Higher NationalDiploma. Students are actively encouraged to move freely betweenvocational and academic courses in order to reach their fullpotential, and the College also plays a major role in keeping theWelsh language alive, with much of the day to day dialogue takingplace in Welsh.
'The quality of the teaching and theequipment we have here allows our engineering students toexperience the complete design to manufacture cycle forthemselves,' says David Price, who heads the Faculty ofTechnology.
'We use industry-standard CAD/CAM software andthe machine tools installed here are broadly representative ofthe level of technology that is to be found with employers inthis region.
One of the reasons why we opted for XYZ machines,for example, is that they are used in the Airbus factory atBroughton and we want to provide training on equipment that iscompatible with the market we serve here in North Wales.'Coleg Menai's latest purchase is a 13HP (10kW) XYZ Mini Mill560, which despite its small footprint of just 6ft2 (0.56m2) hastravels of 560mm in X, 400mm in Y and 500mm in Z.
It alsofeatures rapid travels of 20m/min, a 10-station toolchanger (16optional) and spindle speeds up to 8000 rev/min as standard or12,000 rev/min optional.
With safety very much in mind, steelconcertina covers are fitted to all three axes.
The Mini Mill 560installed in the Faculty of Technology is equipped with theSiemens 802D control, although the Siemens 810D conversationalShopmill, Fanuc Oi MB and Heidenhain iTNC 530 controls areoffered as alternatives.
In common with other XYZ CNC machinetools on site, the new machine is networked to the design suite,which means programming can be done either on- or off-line.
Thisgives students hands-on experience of downloading CAD/CAMprograms.
Workshop instructor Rhys Parry says he reassuresstudents new to CNC with the words: 'If you can use a mobile'phone, you can operate an XYZ machine'.
He singles outthe Prototrak control fitted to the manual/CNC mills as'being a great introduction to CNC' and, as the personresponsible for maintenance, is equally enthusiastic about thereliability and maintainability of the XYZ manual and CNCmachines.
The first Prototrak-equipped mill was installed 10years ago, while the latest, a SM1500, was installed lastSeptember.
It has a 3HP (2.25kW) spindle motor providing a75-4200 rev/min variable speed range and X, Y and Z travels of660mm by 330mm by 406mm.
With operator safety a majorconsideration, especially in a college environment, full tableguarding is supplied as standard.
One indication of how wellstudents have responded to the quality of the teaching and theinfluence of the technology available to them at Coleg Menai canbe gauged from the College's success in last November'sEEF Modern Apprenticeship Competition for Wales.
It was the ninthyear in a row that Coleg Menai swept the board in thisprestigious competition, with prizes awarded to eight studentswho between them are serving apprenticeships with AngleseyAluminium Metal, Blaenau Plastics and BNFL.
Whatever the individual's background, interests or ability,Coleg Menai reckons to have something to offer on its threecampuses situated in the university city of Bangor and the Isleof Anglesey, North Wales. A wide range of vocational and academiccourses ensures that the college's intake continues toincrease year on year, with over 10,000 students currentlystudying full- or part-time at the College, at home and on-line.The campus at Ffordd Ffriddoedd houses the Faculty of Technology,which has more than 500 students each year signing up toengineering courses ranging from NVQ Level One to Higher NationalDiploma. Students are actively encouraged to move freely betweenvocational and academic courses in order to reach their fullpotential, and the College also plays a major role in keeping theWelsh language alive, with much of the day to day dialogue takingplace in Welsh.
'The quality of the teaching and theequipment we have here allows our engineering students toexperience the complete design to manufacture cycle forthemselves,' says David Price, who heads the Faculty ofTechnology.
'We use industry-standard CAD/CAM software andthe machine tools installed here are broadly representative ofthe level of technology that is to be found with employers inthis region.
One of the reasons why we opted for XYZ machines,for example, is that they are used in the Airbus factory atBroughton and we want to provide training on equipment that iscompatible with the market we serve here in North Wales.'Coleg Menai's latest purchase is a 13HP (10kW) XYZ Mini Mill560, which despite its small footprint of just 6ft2 (0.56m2) hastravels of 560mm in X, 400mm in Y and 500mm in Z.
It alsofeatures rapid travels of 20m/min, a 10-station toolchanger (16optional) and spindle speeds up to 8000 rev/min as standard or12,000 rev/min optional.
With safety very much in mind, steelconcertina covers are fitted to all three axes.
The Mini Mill 560installed in the Faculty of Technology is equipped with theSiemens 802D control, although the Siemens 810D conversationalShopmill, Fanuc Oi MB and Heidenhain iTNC 530 controls areoffered as alternatives.
In common with other XYZ CNC machinetools on site, the new machine is networked to the design suite,which means programming can be done either on- or off-line.
Thisgives students hands-on experience of downloading CAD/CAMprograms.
Workshop instructor Rhys Parry says he reassuresstudents new to CNC with the words: 'If you can use a mobile'phone, you can operate an XYZ machine'.
He singles outthe Prototrak control fitted to the manual/CNC mills as'being a great introduction to CNC' and, as the personresponsible for maintenance, is equally enthusiastic about thereliability and maintainability of the XYZ manual and CNCmachines.
The first Prototrak-equipped mill was installed 10years ago, while the latest, a SM1500, was installed lastSeptember.
It has a 3HP (2.25kW) spindle motor providing a75-4200 rev/min variable speed range and X, Y and Z travels of660mm by 330mm by 406mm.
With operator safety a majorconsideration, especially in a college environment, full tableguarding is supplied as standard.
One indication of how wellstudents have responded to the quality of the teaching and theinfluence of the technology available to them at Coleg Menai canbe gauged from the College's success in last November'sEEF Modern Apprenticeship Competition for Wales.
It was the ninthyear in a row that Coleg Menai swept the board in thisprestigious competition, with prizes awarded to eight studentswho between them are serving apprenticeships with AngleseyAluminium Metal, Blaenau Plastics and BNFL.
Subscribe to:
Posts (Atom)